Jump to content
SAU Community

Recommended Posts

Hi All,

Can someone please tell me the brand of this crossover?

Thanks in advance.

20121109_082102.jpg

Logo doesnt ring a bell but the guts and layout look common to a few brands

Why do you need to know ? curious

Logo doesnt ring a bell but the guts and layout look common to a few brands

Why do you need to know ? curious

Thanks.

Basically I am trying to identify all my audio components in the car (new car - so I did not fit / install any of it).

This is in the rear, I just pulled the rear boot trim down to look behind and saw these, but the weird thing is the speakers in the rear parcel shelf are MB Quart RMF160 which are, from what I understand, part of the MB Quart RVF 216 Component Speaker set up.

This is why I am confused as the cross overs do not appear to be MB Quart which makes me worry the rear set up is bastardised from different bits and pieces.

Looks like I should pull the trim right off and try and see what tweeters are up in there.

Thanks.

Basically I am trying to identify all my audio components in the car (new car - so I did not fit / install any of it).

This is in the rear, I just pulled the rear boot trim down to look behind and saw these, but the weird thing is the speakers in the rear parcel shelf are MB Quart RMF160 which are, from what I understand, part of the MB Quart RVF 216 Component Speaker set up.

This is why I am confused as the cross overs do not appear to be MB Quart which makes me worry the rear set up is bastardised from different bits and pieces.

Looks like I should pull the trim right off and try and see what tweeters are up in there.

The cover isnt mb quart mb quart logo is in red and black on those

the parts inside look of mid range quality cost wise so not junk it might be a japan brand logo

of a normal local brand ? Mb quart speakers are easy to ID compared to normal brands

And sound good

I wouldnt worry if the xover is a bastard as long as both sides are the same , the xover points on a vast amount of tweeters is very close to the same point in khz (5-7khz)and mids around 180hz-4500-6khz @12 db

Sometimes the circuit boards say the brand? they pop out easy in most cases

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...