Jump to content
SAU Community

Recommended Posts

Hey guys I can post pics up in the next day or two or pm me your number and I can text you pics straight away.

I have a pair of replica Bride Low Max 2 (Reclinable standard black back) seats for sale. Bought from group buy over 1 year ago. These are the really good ones. Comes with jap brand rails to suit GTT. No modifications at all, simply bolt in new ones (brand name escapes me atm) Very low seating position and adjustable. Very good condition. No rips, tears, wear ect.. Used in car for around 5 or 6000km.. $1200*. Rails alone were $500

Have a pair of gtr replica Drift seats. May come with universal rails, will have to look for them. Very good condition. No rips, tears, wear ect.. Used them for about 2000km than upgraded to Bride seats for a lower seating position... $250* with rails if I still have them

Trust oil cooler kit with inbuilt thermostat. I think its a 13 row. Very good condition. Used for around 7000km comes with all brackets and lines. $800*

Also have a carbon fibre air box kit from justjap. http://justjap.com/store/home.php?cat=381

Never fitted.. $200*

*Plus postage. Or can deliver to most places around Melbourne

Yeah I do. I can send them up to sydney for you. Pm me your number and ill send you some pics

Drift seats sold!

Brides still available. If you want to feel like a race car driver than these are the seats for you ;)

IMG_1317.jpg

IMG_1316.jpg

Little white mark on seat. Barely visible, about the size of half finger nail. looks worse in photo because I tried to remove it and its a little wet.

IMG_1318.jpg

Keep those temps cool at the track. Dont waste your money on cheap leaky products. Ducks nuts right here and with in built thermostat your car will still warm up like normal even in the middle of winter

th_IMG_0097.jpg

hey mate your welcome to come and try, there still in the car you never know. im 6.2 and 95kg and i fit pretty tight but not uncomfortable tight. Ive been on long 2 hour drives without a problem. A bigger seat would be ideal though

Not at this point. Im going to try sell as a whole first

Price drop on Bride Seats $1100 with rails

Price drop on Oil Cooler $700

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
×
×
  • Create New...