Jump to content
SAU Community

Interesting Read On Additives In E85 Causing Injector Blockage


Recommended Posts

For those of us who daily drive on e85, it'd be a good idea to run a tank of 98 every couple months

http://forums.evolut...07-post130.html

Out of interest, I work for Caltex at the Lytton Refinery in Bris and have had lengthy debates on ethanol based fuels for some time now with the onsite chemists.

I am aware of E10 fouling fuel filters with particulates (especially in the early blends where sugar cane was sourced for processing in early build facilities and had high "micro strand" content), but I haven't heard of any negatives of running straight e85.

A lot of testing has been done between Caltex and Holden on this (about 4 years prior to e85 hitting the pump) so I'd be sceptical that this is an overseas issue and not a concern here in Aus. I'm not sure if other fuel distributers (BP, Shell, etc) are providing e85 at the pump, and if they are, I'd be more concerned that this supply is fully imported.

Edited by Wardski

Caltex is bio-fuel, not really e85 as it varies throughout season and on average in the low e70s

United are only stations offering true pump e85

I've been daily driving on e85 for over a year without any issues, but there are reports of aussies having problems with blocked injectors

Edited by domino_z

Caltex is bio-fuel, not really e85 as it varies throughout season and on average in the low e70s

Not quite, you're half way there, and yes it is a form of bio-fuel (as is all nature based fuels including bio-diesels), and depending on the season we use Butane and other stimulators to boost the ethanol rating to ensure E85 is maintained. FYi, both BP and Caltex do the same for 98 PULP.

I'm not familiar with what United is supplying, but its certainly fully imported - and therefore you take a major risk as to the quality controls put in place by the importers prior to distribution to ensure you have a good product. Alarm bells are ringing for me straight away as when you consider it takes 6-8 weeks for an e85 shipment to arrive from India/Singapore/Vietnam - or even longer if further abroad, and the fact its probably about e60 when it hits our shores, there could be a number of issues with it aside from it losing density and a number of other key characteristics - which mind you, then United's suppliers then blend it with god knows what to boost it back to +/- e85 before you fill up....

IMO nothing beats home grown.

Edited by Wardski

Not quite, you're half way there, and yes it is a form of bio-fuel (as is all nature based fuels including bio-diesels), and depending on the season we use Butane and other stimulators to boost the ethanol rating to ensure E85 is maintained. FYi, both BP and Caltex do the same for 98 PULP.

I'm not familiar with what United is supplying, but its certainly fully imported - and therefore you take a major risk as to the quality controls put in place by the importers prior to distribution to ensure you have a good product. Alarm bells are ringing for me straight away as when you consider it takes 6-8 weeks for an e85 shipment to arrive from India/Singapore/Vietnam - or even longer if further abroad, and the fact its probably about e60 when it hits our shores, there could be a number of issues with it aside from it losing density and a number of other key characteristics - which mind you, then United's suppliers then blend it with god knows what to boost it back to +/- e85 before you fill up....

IMO nothing beats home grown.

Im on my 8th 44 gallon drum of E85 from United (Rozelle Sydney) since switching from Sucrogen. The lowest ethonal percentage I have seen is 93 (I test every drum)

The car gets raped hard in all different forms of motorsport and it hasn't missed a beat with United.

The Caltex brew is consistantly all over the shop.

United's e85 ethanol is sourced from sucrogen, or CSR, so that's definitely home grown isn't it?

Only the petrol is from singapore.

Well blow me down, http://www.unitedpet....com.au/ethanol (sourced from DBRL Bio-refinery Ltd in Dalby, QLD)

Good to see us QLD'ers are good for something :) So the e85 is sorghum based (cereal grains + sugar cane).

Maybe the problems are stemming from the e85 cleaning out any residue in the fuel tank from previously using 98 RON and clogging fuel filters. Who knows. Either way there shouldn't be any concern about fouling from e85 by DBRL - they use current tech refining methods to create e85. I'll go have a chat with the chem lab today to get their spin.

Edited by Wardski

That's cheap. Must be GTR tax on fuel too.

False economy more like it. 60ltrs of e85 won't go the distance of 60ltrs of 98 PULP - ends up the same $ / km in the end, but you spend more time at the bowser than 98 PULP :D...

Not quite

I get about 20-25% less distance on the daily commute but saving about 35-40% at the bowser + united throws in more power/torque and zero carbon emissions = still winning

The benefits of e85 are there, this ain't no wheeler dealers scenario

Edited by domino_z

That's cheap. Must be GTR tax on fuel too.

Have filled up at 4 different stations around me now over last month and all been just over a dollar

I think that one near you is price gouging on all the kids with mod'd cars up your way

Edited by domino_z

Well blow me down, http://www.unitedpet....com.au/ethanol (sourced from DBRL Bio-refinery Ltd in Dalby, QLD)

Good to see us QLD'ers are good for something :) So the e85 is sorghum based (cereal grains + sugar cane).

Maybe the problems are stemming from the e85 cleaning out any residue in the fuel tank from previously using 98 RON and clogging fuel filters. Who knows. Either way there shouldn't be any concern about fouling from e85 by DBRL - they use current tech refining methods to create e85. I'll go have a chat with the chem lab today to get their spin.

guess my news is old news now then, because i remember that sucrogen used to supply united, then again, that was in 2009, i guess they've made enough off their e10 and government subsidies to acquire their own refinery. Btw, are you in the refinery business? Care too hook up a fellow forummer with a grad program space? I'm doing chemical engineering =x

guess my news is old news now then, because i remember that sucrogen used to supply united, then again, that was in 2009, i guess they've made enough off their e10 and government subsidies to acquire their own refinery. Btw, are you in the refinery business? Care too hook up a fellow forummer with a grad program space? I'm doing chemical engineering =x

Indeed I work for Caltex in projects (as a Civil Structural Project Manager) at the Lytton Refinery. Caltex certainly has a grad program (there's information on the Caltex au website), where are you located? I'm not sure if you're aware that Caltex Kurnell refinery will be closing in 2014 so I'd suggest if you're south of the QLD border, don't waste your time.

Edited by Wardski

Indeed I work for Caltex in projects (as a Civil Structural Project Manager) at the Lytton Refinery. Caltex certainly has a grad program (there's information on the Caltex au website), where are you located? I'm not sure if you're aware that Caltex Kurnell refinery will be closing in 2014 so I'd suggest if you're south of the QLD border, don't waste your time.

well, i'm actually in vic, but i'm willing to travel to anywhere, so location isn't really all that important

Im on my 8th 44 gallon drum of E85 from United (Rozelle Sydney) since switching from Sucrogen. The lowest ethonal percentage I have seen is 93 (I test every drum)

Hey Kev, I have a Zietronix analyser in my STi. Reads consistently 85 to 87% out of Rozelle united.

STi_E85_guage.jpg

Brian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...