Jump to content
SAU Community

End Of Year Wollongong Via Royal National Park Cruise- Sat Night, Dec15Th


Recommended Posts

Hi Guys, i run H.R (High Rolla SYD), i'm organising an End Of Year Invite Only Cruise through the famous Royal National Park, we'll be ending at Wollongong Harbour over the other side of the point to the Lighhouse. I am extending this invitation to SAU Forum members to attend, it'd be great to have you come along! Here are the finer details:

DATE: Saturday Night, 15th December

MEET WHERE: Holsworthy Train Station Carpark (use the Carpark Closest to the Roundabout)

MEET TIME: from 7:15PM

WE LEAVE @ 7:45PM (7:50PM the Latest)

HOW TO FIND THE MEET: Turn Right at the Roundabout off Heathcote Rd. past Moorebank Sports Club- onto Marcarthur Drive... Train Station Carpark is Located on The Boulevard- take a right @ the 1st roundabout on Macarthur Drive!

Cruise Route on Google Maps: http://goo.gl/maps/bMHxJ

Although our Group is a mix of performance/modified vehicles from different manufatures (JDM to Prestige), our rules are simple: its a Cruise, NOT a Race. Although its a Saturday Night, that's no excuse to Cut Sick through the National Park... Use your common sense; so No BS, No Hooning, No cutting sick & No acting up!! Our aim is to promote the car scene in a positive way, so lets give it a good name by following those rules, as we (Car Enthusiasts) have had too much negative attention from the media lately as it is. Cheers :)

REMINDER:

- Fill up a full tank as we won't be stoppping!

Photo of RNP, courtesy of Form & Function:

post-64667-0-33780800-1353333500_thumb.jpg

Edited by GoldZilla
  • 2 weeks later...

Hi guys, great to see some interest for the Cruise next Saturday Night ;)

On our end at H.R, we usually have between 30-50 cars come out... which is a decent sized crowd, not too big- compared to other cruises i've been too!

See everyone who is coming along Next Satuday Night :action-smiley-069:

Looking like we have nice numbers for Saturday Nights Cruise :)

Just an UPDATE, we had to Change the MEET POINT (due to being advised that the Sports Club will most likely be packed)!

Here are the UPDATED details:

MEET WHERE: Holsworthy Train Station Carpark (use the Carpark Closest to the Roundabout)

MEET TIME: from 7:15PM

WE LEAVE @ 7:45PM (7:50PM the Latest)

HOW TO FIND THE MEET: Turn Right at the Roundabout off Heathcote Rd. past Moorebank Sports Club- onto Marcarthur Drive... Train Station Carpark is Located on The Boulevard- take a right @ the 1st roundabout on Macarthur Drive!

To confirm.... We are doing the whole of Royal National Park, from Start to Finish (at Stanwell Tops) then on to Wollongong! ;)

Cruise is Going Ahead 100% at this Stage, weather forecast is looking great for us Tonight :D

Just A Reminder:

It's a Cruise, NOT a Race!!! Please take it easy going through the Royal National Park... Everyone knows its easy to get sideways or do a skid, your not impressing anyone. Hit up a track days,etc if you want to 'Cut Sik', lets keep it off the street & give the modified car scene a good name! Cheers :)

PLEASE FILL UP A FULL TANK BEFORE THE CRUISE, AS WE WONT BE STOPPING!!!

dont know if I found the right cruise or not....we left it a bit late so we just cruised through the natio hoping to find yas...ended up finding a pretty big crew...but we were the only skyline lol....lots of evos....

nah I had a silver one...went down to the wharf area near the lighthouse for a bit but left pretty early as I didnt want to hang around too long waiting for coppers.



  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...