Jump to content
SAU Community

Recommended Posts

Hi guys,

I've got a s2 r33 gts-t with a wheel scrubbing issue up front.

Components wise here's what I've got on there:

18 x 9.5 +38 with 15mm bolt on spacers (think this makes it effectively +23?)

Sydneykid bilstein/whiteline coilovers

245 wide tyres

Guards rolled

The scrubbing occurs when I hit a big bump, when I transition a lot of weight onto one wheel (high speed cornering) or say if I'm going downhill and turn hard and transition onto one side etc. I think from looking at the markings on the guards, that the main issue is because this wheel and tyre combo edge sits in line with the outer guard edge, so there's not a lot of travel distance needed to make contact and relatively soft suspension. Here are some pics of where the wheel sits and the markings:

2012-11-12%2017.30.02.jpg

2012-11-12%2017.30.12.jpg

2012-11-12%2017.30.47.jpg

I have thought about doing

Stiffer coilovers

Front camber arms/bush kit

Try fit thinner tyres on same rims

Thinner rims/thinner tyres

Is it possible with some combination of neg camber and smaller width tyres to fix this, or will I need to go to a smaller rim & tyre combo only?

Ideally I'd have an 18 x 8.5 +30 on there without the spacers, but this is the most expensive option, so I thought I'd ask some experts on here first if it's possible to work with what I have.

Cheers.

Edited by copycutter

I've got 18x9.5 +20 with a 235 tyre and lowered on my 33. I have fairly stiff suspension and no rubbing what so ever in hard high speed cornering and all. Maybe try and get the guards lipped and it might give u more clearance. It's fairly cheap. Maybe 50 a corner

Ditch the spacer, or you can go camber arms and add some negative camber (doesnt look like ur running much camber at all), just depends how much camber would be required, looks like 2.5-3 degrees may do the trick and isn't too crazy? Or lastly the most expensive option of thinner rims. My advice is ditch the spacers if possible (or get thinner spacers)

I've got 18x9.5 +20 with a 235 tyre and lowered on my 33. I have fairly stiff suspension and no rubbing what so ever in hard high speed cornering and all. Maybe try and get the guards lipped and it might give u more clearance. It's fairly cheap. Maybe 50 a corner

His guards are already rolled

lose the 15mm spacers, looks like theres 15mm odd of rim sticking out, just see how well the rim clears the suspension arms etc, on the inside of the arch

hahaha We msg'ed at the same time, The only option left is different rim with smaller offset.

What size are your brakes? how do 18" not clear the brakes?

Edited by badben

They're just stock brakes, but for some reason the +38's spokes design on the CR Kai means the spokes hit the edge of the brake caliper. I've tried 5mm slip ons - still fouls. It's just the shallow design that comes with that offset. I've got 9.5 +20's on the rear and I had to initially run them up front until I got the front spacers, and they cleared easily. I've never seen bolt on spacers in 7-8mm and I'm not real keen on slip ons, especially over 5mm.

The answer is as simple as it always has been.

Only use wheels that SUIT ALL ASPECTS OF THE FITMENT. That includes brake clearance.

No point having pretty wheels that make the little girls' pants fall off if you have to fit stupid spacers to make them work.

Depends on spoke design as we'll as offset. You will need to test fit the rims unless someone else on here has run those exact rims on there r33 and can advise. Cheap option, camber arms. Expensive option different rims

Going off your pic's, your car has good clearance around tyres, maybe suspensions to soft. Allowing to much travel.

Just so you know camber arms will make your tyres wear unevenly so you'll need to do regular tyre swaps, Front to back , left to right depending on if your tyres are directional or asymmetrical

Your guards don't look very rolled to me. Lose the inner splash guards. Failing that, I have posted this before. Works great, and it's free, just take your time.

http://www.skylinesaustralia.com/forums/topic/401848-trying-to-fit-my-dream-wheels-te37/page__st__20

yeah guard doesn't look very rolled to me at all

judging by where that scubbing mark is on whatever corner that under guard pic was taken you'd have no problem if they were rolled properly

also looks like you could do with dialing in some negative camber

Edited by mystery_kid

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...