Jump to content
SAU Community

Recommended Posts

Hey all,

Im chasing some 26/gtr inlet bits for my 26/30 project. I need pretty much everything (sensors/aac all that crap) on the inlet side bar the plenum. Also need a cas and an injector resistor pack and the metal thing that has timing marks on it. I also need water and oil lines but im pretty sure Kat has soome from memory.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/414823-anyone-got-some-26gtr-inlet-bits/
Share on other sites

injector resistor pack - Got a new one $100

Haltech does it for me :)

May have water and oil lines. I know I have a full new kit of hoses.

also have a full new set of ID1000cc injectors if you need em down the track

Sounds good Richard. Let me know about the hoses and ill take the resistor pack. Thanks for the offer of the injectors, but ill be going either 1500s or 2000s in the gtr so ill put the 720s in this motor (its for a vl i bought as a tow car lol)

^ This guy Andrew is awesome ^ got heaps of parts off him.

Cheaper, faster delivery, nicer :thumbsup:

Ah ok cool, might see what its all worth then.

Let me know when i can meet up with you and grab that injector pack. Im free mon,tues and thurs.

my numbers Zero 404 102 21 five. Just send me a txt :)

Full set of new hoses for an RB26 engine but not oil/water lines for Turbo/s.

Also new seperate set of heater hoses only - with clamps !

What about a near new after market steering wheel with Boss kit for GTR

Intercooler mesh huh ?

New quality upper control arms even

Power steering pump maybe tempt you :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...