Jump to content
SAU Community

Question For The Older Guys Here. Man Boobs, Gravity, Middle Age Spread Etc.


Recommended Posts

Morning guys, random question for you all, and more so for the older guys here.

I've been thinking about when is the "right time" to start focusing more on cardio and reps to avoid the sagging of old age. I'm only 30 now but comments from the missus about me possibly having "man boobs" when I'm older because I have pecs now got me thinking. At what point do you need to switch up the work being done to keep everything in shape? Is it just a case of maintaining what you are doing and man boobs come about because you fall off the wagon for one reason or another? I have no issues with motivation now, but who knows in 10 years.

At the moment chest work is usually sets of 3 with reps of 8, have you older guys found that you need to start adding sets or more reps later in life to keep everything where it should be in terms of tone/lift.

Or is the key just more cardio and better diet? I was covering 100 or so k's a month on foot prior to breaking my leg (70/30 split running/walking) and will get back to that point when the leg allows. Is that enough in the long run or do people switch to cycling etc? I guess it would vary depending on metabolism, diet etc.

At the moment, on a cheapo set of digital scales I'm about 12% bf, weigh 84-85kg and I'm 6ft tall so average build for the height I'd say. BF has edged up a notch since breaking my leg, which is not unusual, it normally ohovers around 10-11 on the same scales, I am not trying to get leaner or anything, just trying to maintain a healthy physique and look like I do some exercise.

I wouldn't say I'm fat or anything but I can easily see how in another 10years with gravity winning, my chest could sag and become man boobs if the right effort was not put in.

I'm only 30 now but comments from the missus about me possibly having "man boobs" when I'm older because I have pecs now got me thinking.

Please tell me your trolling?

I don't even know where to start...

man boobs are caused by fat... don't get fat and you'll be fine

'chest work' '3 sets of 8' 'BF measured on digital scales'... have you read nothing in this section!?

Sorry Nick, not trolling but obviously an offensive or retarded question.

If it's as simple as fat control, I can do that easily enough.

When I say Chest work, I mean 3 sets of 8 reps for each chest exercise I do. Primarily the routine is based on that one that was listed in the main gym thread, bench, dead lifts, military press (when leg not broken) etc. It seems to work well enough for me in terms of strength/size gains so I've been happy with it. If that's wrong then fair enough, we're all learning.

Those scales are all I have as a point of reference, remember I exercise at home. I don't take the numbers as gospel but I do take note if they change.

And as you are not an older guy, I'm not sure how much of a say you get anyway ;)

I'm interested to know what changes take place as you get older, does it become that much harder to keep the fat off? Does the skin just naturally sag and make it harder to maintain some tone etc.

I imagine I'll always be doing "something" as I enjoy exercising.

Edited by ActionDan

Oh is that what you meant? Sorry. Well yes I get a bit sweaty and I'm sure I burn up some calories but I only exercise 3 times a week for about 50-60mins so I'm by no means intense.

And sure, that's fine for now, but as I get older and the metabolism naturally drops a gear or two, I'm just keen to know if anyone else has faced issues with staying in shape.

It seems that just maintaining cardio and healthy eating should be enough.

Surely age has some effect on how well the body responds to exercise though?

you won't gain muscle at the same rate.

you will find it harder to burn fat

you will more likely get injured

Don't try to "bulk" and you'll be fine.

keep training and eat well.

As you get older, your diet and habbits change - restaurants, wine, weekends spent doing shit that would have been seen as boring in your younger years.

Eat well and stay active.

Observation:- Athletes that do middle to long distance are wiry or slim. Athletes who require explosive power are bulky with extra muscle mass.

The above also involves different forms of dietetics - that's true.

1) Eat foods containing essential fatty acids rather than saturated fats

2) Avoid meats that have a possibility of hormone enrichment > rapid weight gain before market

3) Cardio of a middle distance - but also using upper body strength would help answer your Q

4) Eating pumpkin seeds (for aging men over 35) helps to maintain testosterone levels and avoids i) a splitting off into oestradiol (a female hormone) and ii) a splitting off into dihydroxytestosterone (which causes benign prostatic hypertrophy - or even some forms of prostate cancer). A herb called Saw Palmetto does the same - but I wouldn't start that until after 40.

5) Alcohol slows down BMR (basal metabolic rate)

I'm missing out on more, which other guys here will fill you in on, but Nick, TTT and I have started you off I guess.

I'm not trying to bulk, I started out the year at around 79-80kg with a goal of getting to around 84-85ish, I'm there now so won't be getting much bigger, though I imagine I would put a couple extra kg on when I can work my legs again.

Training and eating well are two things I can do :) I've always been a big "food" person and that will never change, I love eating.

Thanks Terry, some great info in there.

Edited by ActionDan

Sorry Nick, not trolling but obviously an offensive or retarded question.

If it's as simple as fat control, I can do that easily enough.

When I say Chest work, I mean 3 sets of 8 reps for each chest exercise I do. Primarily the routine is based on that one that was listed in the main gym thread, bench, dead lifts, military press (when leg not broken) etc. It seems to work well enough for me in terms of strength/size gains so I've been happy with it. If that's wrong then fair enough, we're all learning.

Those scales are all I have as a point of reference, remember I exercise at home. I don't take the numbers as gospel but I do take note if they change.

And as you are not an older guy, I'm not sure how much of a say you get anyway ;)

I'm interested to know what changes take place as you get older, does it become that much harder to keep the fat off? Does the skin just naturally sag and make it harder to maintain some tone etc.

I imagine I'll always be doing "something" as I enjoy exercising.

sorry, just that man boobs comment set me off lol

look of course your skin sags and gravity has an effect but your talking about your 50's and 60's... really not something you should be worrying about... tell your Mrs she should be more worried about her ass

my reaction to 'chest work' is simple... train movements not muscles... concentrate on pushing or pressing and the chest will take care of itself... you should be mixing up your sets and reps too... don't just blindly go into the gym and do 3 sets of 8 every time... sometimes you should do more sets of lower reps... sometimes less sets of higher reps etc

otherwise Terry makes some good point about hormones... keep your testosterone up with good diet and resistance training and bitch tits will stay away... no titty flab = no sagging

muscle does not turn to fat and vice versa

It's cool man, I hear the roids make you angry.

Haha, she's quite concious of her ass, and even more so with 4mths of preggo on board. I don't have too many concerns about her as she's self motivated and knows what I think about fat people who are fat through sheer laziness and bad choices. My last ex found out how serious I was about that when she became an ex and the current knows that.

Sounds harsh I know, but I have my standards :)

Edited by ActionDan

I'm only 30 now but comments from the missus about me possibly having "man boobs" when I'm older

Oh NOW I get it!!!!!!!!!!!!!!!!!!!!!!!!

She only throws that in before you can comment about her ass!!!!!!!!!!!!!!!!!

ROFL

Haha, I think she does it because she prefers a fairly lean look and I'm not lean enough. She prefers me around 80kg I'd say, I prefer to be closer to 90, I've met in the middle.

When we met I was around 92 but injuries put me right back to under 80.

Thankfully, I've never had need to comment about her ass, she takes good care of it :)

It's cool man, I hear the roids make you angry.

Haha, she's quite concious of her ass, and even more so with 4mths of preggo on board. I don't have too many concerns about her as she's self motivated and knows what I think about fat people who are fat through sheer laziness and bad choices. My last ex found out how serious I was about that when she became an ex and the current knows that.

Sounds harsh I know, but I have my standards :)

congrats on the little one mate!

they say weight control/loss is made in the kitchen not gym. so have a clean diet and eat at your body maintenance level and you will be fine. at 12% bf you should be very lean.

http://www.freedieting.com/tools/calorie_calculator.htm

As part of my broken leg I've had to change my diet anyway so I'll likely just continue that to a degree as its allowed me to find some other healthier alternatives.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...