Jump to content
SAU Community

Recommended Posts

Hey guys Located in Sydney, contact 04 21 451 965 (prefer pick up, may post at buyers expense)

Have a brand new in the box and still sealed in plastic bosch 044 with a brand new surge, not some dodgy ebay overseas job, was made correctly want both items gone $ 250 for both

Also have a Brand new in the box never used turbosmart pro-gate 50 mm ext gate blue, 600 ono (goes for something ridiculous like 900 on the site

also have 80 mm throttle body, suit rb25, brand new 120

Also have an rb25/30 with an r33 gtst box

the block has 20 thou over, JE pistons, h-beam rods, new ACL rings, bearing, gasket, 2000 cc boschy indy blue injectrs, greddy style plenum, stage 1 poncams, new oil pump, r33 gear box with brass button twin plate clutch, bought of someone else whose funding had run out to complete, lost my interest in this side project and want this and everything with it gone, its had a full rebuilt hasnt been run since the rebuild, after 3500 ono for the engine realistically I will take 3200, dont offer me lower then that, and 1400 ono for the box and clutch included, not keen on seperating the box from the engine untill the engine is sold, if your after both together (its still connected) or you can take it all for 4300, anyway enough rambling on

Pics

post-103063-0-21227800-1355453341_thumb.jpgpost-103063-0-87867200-1355453354_thumb.jpgpost-103063-0-55280500-1355453369_thumb.jpgpost-103063-0-62720500-1355453380_thumb.jpgpost-103063-0-16178200-1355453391_thumb.jpgpost-103063-0-66878700-1355453402_thumb.jpgpost-103063-0-65573500-1355453413_thumb.jpg post-103063-0-44422900-1355453565_thumb.jpgpost-103063-0-52428300-1355453579_thumb.jpgpost-103063-0-39958500-1355453590_thumb.jpg

Edited by GTR_77

Had a couple questions on the pump it is genuine and does have czech republic stamped on the side, not germany and it is stamped properly not dodgy

http://trolltuner.com/?p=692

If your after the pump alone im after 200

Sorry mate not parting out the motor, have been receiving alot of interest and calls about the motor, price of the motor will also be going up once I have validated the internals come this monday. If the current interested party's dont end up wanting it, pics and proof will be posted along with the new price so please disregard the current one.

Bosch 044 and surge tank SOLD

Brand new Turbosmart pro gate price drop to $500

Edited by GTR_77

Engine is now SOLD pending payment.

Also have a picture of the gearbox and clutch

its a Xtreme twin plate ceramic clutch which is new and never used its 1300 for it in the box brand new im after 950 ono

manual rb25 turbo gearbox 1400 ono

post-103063-0-61999800-1356657340_thumb.jpg

post-103063-0-42218500-1356657349_thumb.jpg

post-103063-0-82154200-1356657357_thumb.jpg

post-103063-0-36895600-1356657364_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...