Jump to content
SAU Community

Recommended Posts

I have a set of genuine Rays TE37SL in black

near perfect condition one small mark on one rim from a stone see picture.

19x 10.5 +12 perfect offset for GT Rs

Had them on my r34gtr only just scrubbed on the front right guard liner on full lock turning right.

They are 12 months old

Tyres are federal 595, 275/30/19 with 95% tred only done 2000km

Included are custom made center cap adapter rings to fit any center caps, flat center caps,the red sl stickers for the wheel spokes, metal hub rings and black rays wheel nuts genuine.

would prefer pick up from but willing to package if the buyer organises courier.

Located Sydney

Can pm or contact me on 0450 605 335

Price $4200

post-33517-0-80828500-1356572049_thumb.jpg

post-33517-0-31391000-1356572106_thumb.jpg

post-33517-0-46278600-1356572111_thumb.jpg

post-33517-0-03093500-1356572116_thumb.jpg

post-33517-0-08287500-1356572890_thumb.jpg

post-33517-0-96198300-1356574002_thumb.jpg

post-33517-0-19148700-1356572886_thumb.jpg

post-33517-0-93701700-1356572113_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/416272-rays-te37sl-black-19x105-12/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...