Jump to content
SAU Community

Recommended Posts

Hey all im new to the RWD side of the car, iv owned afew rwd in the past but most of my past rides have been hondas

atm my current ride is a 1992 honda prelude f22

i got this car about 18months ago as nothing but i shell and managed to rebuild in to what it is today

afw mods i have on the car are,

body kit

shaved boot lid

halo head lights

clear tail lights adj sleeved springs

the motor is an stock f22 but as we speak i have a new f22 being built for it. its a fully forged 2.2ltr with a stage 2 turbo cam, upgraded springs, vavles, retainers, and guides ect ect

its runninf twin walbro 255s with nos and a t04e good for about 600hp all running off a hondata

with a little luck once i got the new motor in i would be happy if i can manage 350-400hp atw @ 15-20psi

here a few pics of what i started with to where i am now

SANY0300.jpg

SANY0270.jpg

SANY0261.jpg

and this is where i am now

photo1_zps3056e244.jpg

photo_zpsde3a109e.jpg

now i know some of you are prob wondering WTF is this guy banging on about? this is a nissan spot not a honda spot......

well over the next few weeks im going to be on the hunt for an R34 shell to start on and do it all over again, and would reall be greatful

for any advide you lads can give me or questions i might have,

the plan is to build a proper drift spec 34 that will get used and not just sit there and look good parked up.

so i guess the first question i have is.........

is there anything i should be aware of or be on the look out for while looking for a shell, parts or even suggestions on what parts to use that wont shit its self after one run.

and befor anyone ask, yes i do understand this is not going to be a cheap project...........(just dont tell my misses, she thinks the turbo for my honda is part of the aircon lol)

thank any help would be great

Link to comment
https://www.sau.com.au/forums/topic/416540-hello-from-qld/
Share on other sites

Have you drifted before?

If not I'd be getting a cheap R32 thats already running with a RB25 in it, (Or just get an R33 GTSt since theyre just as cheap but newer) add a FMIC, Oil Cooler and steel wheeled turbo, weld the diff up and go and learn to drift in it.

You are very likely to keep bending things, and the cost to build a car from shell/rolling chassis most of the time is more expensive then buying individual parts.

It's why a lot of guys are parting out their R33s as they are getting more money for them in parts. Plus if you decide you want to put in a new part, you've got the old one to either sell, or keep as a spare (What I recommend) for if/when it breaks.

Link to comment
https://www.sau.com.au/forums/topic/416540-hello-from-qld/#findComment-6687460
Share on other sites

yeah i have drifted befor, its been a few years, but my last drift car was a vt gts 5.7lt 6spd man with a charger but i dont plan on doing this over night its just going to be over time and the way i see it, if i smash a 32 or a 33 its still going to have to be fixed if it were a 34, and on the plus side i know a thing or two about doing body work on cars, i used to work for a body kit shop doing alot of repairs on drift damage and also build wide bodys

Link to comment
https://www.sau.com.au/forums/topic/416540-hello-from-qld/#findComment-6687473
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...