Jump to content
SAU Community

Recommended Posts

Thank you for taking the time to view this 1996 R33 GTS-T (series 2) Nissan Skyline.

Everything in this vehicle is stock, except for the pod filter and genine 17inch BBS wheels, as per the photographs.

This car has been carefully maintained by a meticulous professional. It has done a bit of distance due to commuting between Melbourne and Traralgon on the freeway for work purposes.

However, it has been serviced regularly and has had a recent 200,000 km major service and timing belt change done (proof provided).

Unlike other similar models, this car comes in excellent condition and is very clean inside and outside. Selling due to new company car.

Sale will include Alpine headunit (not installed) and an aftermarket intercooler (not installed. Removed for insurance purposes.

Currently has a stock intercooler). It also includes genuine 17 inch BBS wheels as per the photos.

Kms: 210,000

Rego: Until September 2013

Price: $8,800 with RWC

Car is located in the S.E Suburbs of Victoria

Price is negotiable, but genuine enquiries only please.

Please call Charith

0421 111 020

cp4946009003217503614_zpsbcede1e7.jpg

cp4880998475525758909_zps1f9c01b7.jpg

cp5653816679863534027_zps1a014dd9.jpg

cp5384712946396489771_zps1bc7ced3.jpg

cp5428389590394452700_zps9b67297d.jpg

cp5667851305941074969_zps6e7c88da.jpg

cp5030635131554892440_zps21ab5ae5.jpg

cp5733531478622354642_zpsd1edd657.jpg

cp5635327561382618732_zpsad3b0f46.jpg

cp5306487672516325881_zps4764377e.jpg

Edited by philmak
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...