Jump to content
SAU Community

Recommended Posts

Got a pretty clean 93 GTR that has bugger all done to it,so far. Had it for about 25,000k`s now. Just the other week i notice this grinding or rattling noise coming from what sounds like the bell-housing on an up hill take off in 1st. Noise only hangs around for 2 seconds or so. Just had it taken from 180 to 220 awkw around the same time. Noise only happens 2-3 times a drive (long drive) on easy take off. Won`t ever happen if take power up on the clutch first. Ayone out there gone through this??

Might be similar to what i have, which I'm guessing is rooted input shaft bearing in the gearbox. I've been driving with it that way for years now (but no launches). I'll get the box rebuilt the next time i take it out.

Check the oil level as a precaution.

Carcass? "Death is no escaaaaaaaaape..."

Might be similar to what i have, which I'm guessing is rooted input shaft bearing in the gearbox. I've been driving with it that way for years now (but no launches). I'll get the box rebuilt the next time i take it out.

Check the oil level as a precaution.

Carcass? "Death is no escaaaaaaaaape..."

Well Adam or 'Mr Stabby' I hope it doesn't come to a gear box re-build $$$. Not before clutch time anyways. Can't feel a thing through the stick though. Went for a blast today and not a thing,so i guess the noise will become more and more consistant with wear? Don't launch it anyways. Still feels like a stock clutch,light as a feather. It all happens while i'm Descanting The Insalubrious.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...