Jump to content
SAU Community

Recommended Posts

Hey Guys its time i sell my much loved exhaust as i have no use for it anymore

it is full titanium except for the front pipes which are full length stainless tuned pipes

The frontpipes weigh in at 7kg and the whole ti catback system weighs in at 6.3kg ( its freaking light as)

it has one dent which one dent which wont affect anything at all and a few little scratches and comes with a silencer ( never used it ).

I bought it for $ 1,600

i would like $1,500 or a swap for a full exhaust system for a 34 GTR inc front pipes plus cash my way depending on the exhaust (condition , use etc )

Would like sydney buyers only can organise to meet some where as i am in the sutherland shire

Thanks Guys

post-68200-0-91680500-1358130604_thumb.jpg

post-68200-0-85830000-1358130605_thumb.jpg

post-68200-0-61734200-1358130606_thumb.jpg

post-68200-0-20326300-1358130607_thumb.jpg

Edited by BNCR33

Are you 100% on fit for a R33 GTR?

I've got a R34 GTR one i'll be selling to find a R33 GTR one cause the channels aren't right and doesn't fit.

^^ hey mate yes it actually came off a r34 GTR , it fits a r33 aswell as it had it on my one , i will measure the lengths tonight and send ya a PM

Cheers Dan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...