Jump to content
SAU Community

Recommended Posts

Hi mate, had this before - you will need to take the headlight to a place that can;

1. place it in an oven to soften the glue that binds the headlight

2. pry open the headlight and re-clip the blinker cap

3. re-seal the headlight with new glue

if you're unable to dis-mount the headlight yourself and are in sydney, you can take the car to Top Secret in Blacktown - who can remove the headlight without damaging any of the clips and then organise for the headlight to be repaired at Plastifusion - which is just around the corner - whilst your car is kept safe at the Top Secret workshop;

if you can remove the headlight yourself you can take it directly to Plastifusion for repair

Top Secret Service Center;

Jack (director) or Pete (head mechanic)

Unit 2, 1-3 Carnegie Place, Blacktown

Phone: (02) 9621 5700

[email protected]

http://www.topsecret....au/index-1.php

Plastifusion

Address: Unit 2 170 Sunnyholt Rd, Blacktown, NSW, 2148

Phone number: 0298318018

Read more: http://www.startlocal.com.au/auto/wreckers/nsw_sydney/Plastifusion_2487986.html#ixzz2IEHAyCe2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...