Jump to content
SAU Community

Recommended Posts

Hey all

Cleaned my shed out and found some parts no longer required.

All Items are located n Adelaide and are pick up or posted at buyers cost.

Item : HKS stainless cat back exhaust suite S13 + maybe others

Condition : Good

Info : 4" straight through to big HKS connon ( Sounds awesome but loud , slightly loud )

Price : $ 300

Item : Sonic performane turbo beanie bag

Condition : NEW

Info : Brand new, Suite GT30 / GT35 or simular

Price : $ 60

Item : R32 GTST speedo cable

Condition : Good

Info : No broken clips

Price : $ 25

Item : S13 rear strut bar

Condition : Good

Info : Suite S13 & R32 rear i believe?

Price : $ 50

Item : RB20 power steering pump ( NON HICAS )

Condition : Worked fine

Info : Non hicas pump includes Greddy pulley

Price : $ 120

Item : RB20 starter motor

Condition : Worked fine

Info : -----

Price : $25

Item : A31 cefiro front sway bar

Condition : Good

Info : Must have for anyone doing RB into S13 conversion

Price : $50

Item : Fuel swirl pot1.5LTR

Condition : NEW

Info :1.5LTR fuel swirl pot

Price : $40

Item : RB nismo engine mounts

Condition : Near new

Info : Were only used for 2XXX KM

Price : $60

Item : Redline & Royal Purple gearbox and diff oils

Condition : NEW

Info : 3.7LTR redline gearbox oil, 2LTR royal purple diff oil

Price : $60 the lot

Pictures attached below.

Any questions feel free to PM me.

Cheers

post-29615-0-80428100-1358476017_thumb.jpg

post-29615-0-61376300-1358476063_thumb.jpg

post-29615-0-26636300-1358476121_thumb.jpg

post-29615-0-41720800-1358476156_thumb.jpg

post-29615-0-74706000-1358476193_thumb.jpg

post-29615-0-77846600-1358476227_thumb.jpg

post-29615-0-12035800-1358476267_thumb.jpg

post-29615-0-83780000-1358476305_thumb.jpg

post-29615-0-72990300-1358476340_thumb.jpg

post-29615-0-60124200-1358476374_thumb.jpg

post-29615-0-87133600-1358476408_thumb.jpg

post-29615-0-80519100-1358476446_thumb.jpg

post-29615-0-77243000-1358476485_thumb.jpg

Edited by stylz7
Link to comment
https://www.sau.com.au/forums/topic/418034-cheap-parts-clean-out/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...