Jump to content
SAU Community

Recommended Posts

G'day All,

Am selling the Stag, so its time for the rest of my parts to go. The long post with photos and descriptions can be found here (http://www.skylinesaustralia.com/forums/topic/410946-massive-rb26dett-sale-gtr-and-stagea/). Below is a condensed list tailored for Stags:

- Drift Racing/Bucket seat, black, R34 GT-R style, comes with rails to fit all C34 Stagea (as was fitted to my Stagea), R32, R33, R34 Skylines and probably Silvias too. Will not freight, pickup only.

$350

- Tein "Type Wagon" adjustable coilovers to suit automatic C34 Stagea (Series I and II), "Low Down Spec Cool Style Master" (love the Jap brands/names for stuff). Fronts have been rebuilt (with genuine Tein seals) and rods re-chromed. Have receipts, not fitted since rebuild (due to sale of car). Rears are still good. Adjustable spring seats, so adjustable in height, damping is fixed valve. Get on these quick!

$750

- Stock Stagea rear upper camber/control arms, left and right side. Also have FR &RR swaybars.

$20 for both

- Space Saver spare wheel, T125/90D16.

$15

The following gear is from/to suit an RB26DETT engine:

- High Mount Twin Turbo Kit, gave me 347AWKW.

$1600 ono

- Upgraded R33 GTR Turbos, rebuilt, larger, inconel/steel wheeled, ball bearing CHRA's, 8000km's on them.

$650

- R32/R33 S1 Coilpacks, full set, with mounting frame, 8000km old, P/N: 22433 60U02.

$150

- R32/R33 S1 Coilpacks, full set, P/N: 22433 60U01.

$100

- CAS with mounting bracket.

$100

- R33 N1 dumps, with heat shields, 8000km old.

$100 for both or $60 each

- R33 N1 exh manifolds, with heat shields, no cracks, 8000km old, untouched ready for porting.

$35 ea or $60 for both

- Alternator with tensioner bracket.

$50

- O2 sensors, FR and RR.

$30 for the pair

- Single pin/blade Oil/water temp sensor.

$7

- Thermostat housing/Coolant snout (block side) PLUS thermostat.

$25

- FR and RR hotside compressor outlet snouts, includes the rear OEM rubber hose.

$50 for both

- Air/coolant temp sensor (OEM, yellow plug).

$15

All offers considered. Shoot us a PM, txt or give us a call. 0429 001 875.

Cheers,

Pete

  • Like 1

and I might as well take this while I'm at it :)

- Air/coolant temp sensor (OEM, yellow plug).

$15

Sorry to do this in 3 seperate posts.

Pm me a delivered price to Adelaide cheers

  • 4 weeks later...

Hey mate just wondering if you would sell the rails seperate? Cause i have a pair of those seats and cant get rails. Or what rails did you use?

  • 2 weeks later...

UPDATE and PRICE DROP

- Drift Racing/Bucket seat, black, R34 GT-R style, comes with rails to fit all C34 Stagea (as was fitted to my Stagea), R32, R33, R34 Skylines and probably Silvias too. Will not freight, pickup only. Saw these in latest Autobarn ad (no rails) for $150...
$350 $200

- Tein "Type Wagon" adjustable coilovers to suit automatic C34 Stagea (Series I and II), "Low Down Spec Cool Style Master". Fronts have been rebuilt (with genuine Tein seals) and rods re-chromed. Have receipts, not fitted since rebuild (due to sale of car). Rears are still good. Adjustable spring seats, so adjustable in height, damping is fixed valve. Get on these quick!
$750 $650

- Stock Stagea rear upper camber/control arms, left and right side. Also have FR &RR swaybars.
$20 for both offers

- Space Saver spare wheel, T125/90D16.
$15 $10

- High Mount Twin Turbo Kit, gave me 347AWKW. Boxed up ready to freight!
$1600 $1400 ono

- R32/R33 S1 Coilpacks, full set, with mounting frame, 8000km old, P/N: 22433 60U02.
$150 $100

- R32/R33 S1 Coilpacks, full set, P/N: 22433 60U01.
$100 $80

- CAS with mounting bracket.
$100 $80

- R33 N1 dumps, with heat shields, 8000km old.
$100 $80 for both or $60 $50 each

- FR and RR hotside compressor outlet snouts, includes the rear OEM rubber hose.
$50 $40 for both

- Air/coolant temp sensor (OEM, yellow plug).
$15

  • 3 weeks later...
  • 4 weeks later...

G'day Nathan,

The coilovers/struts/shocks for C34 stags come in only two flavours...fork or eyelet bottom mounts.

The manuals (and RWD's) have the forks and the autos have the eyelets. Now I'm confusing myself. There's a sticky in this Stagea section which discusses suspension at length.

If you want to check your car, see what the bottom mounts look like... if they are eyelets these will fit. Spring rates are 4kg/mm front and rear which are quite nice balance of rigidity and comfort and are suitable for all stags (once again, read the sticky RE: spring rates).

Cheers,

Pete

UPDATE and PRICE DROP - Drift Racing/Bucket seat, black, R34 GT-R style, comes with rails to fit all C34 Stagea (as was fitted to my Stagea), R32, R33, R34 Skylines and probably Silvias too. Will not freight, pickup only. Saw these in latest Autobarn ad (no rails) for $150...$350 $200- Tein "Type Wagon" adjustable coilovers to suit automatic C34 Stagea (Series I and II), "Low Down Spec Cool Style Master". Fronts have been rebuilt (with genuine Tein seals) and rods re-chromed. Have receipts, not fitted since rebuild (due to sale of car). Rears are still good. Adjustable spring seats, so adjustable in height, damping is fixed valve. Get on these quick!$750 $650- Stock Stagea rear upper camber/control arms, left and right side. Also have FR &RR swaybars.$20 for both offers- Space Saver spare wheel, T125/90D16.$15 $10- High Mount Twin Turbo Kit, gave me 347AWKW. Boxed up ready to freight!$1600 $1400 ono- R32/R33 S1 Coilpacks, full set, with mounting frame, 8000km old, P/N: 22433 60U02.$150 $100- R32/R33 S1 Coilpacks, full set, P/N: 22433 60U01.$100 $80- CAS with mounting bracket.$100 $80- R33 N1 dumps, with heat shields, 8000km old.$100 $80 for both or $60 $50 each- FR and RR hotside compressor outlet snouts, includes the rear OEM rubber hose.$50 $40 for both- Air/coolant temp sensor (OEM, yellow plug).$15

any pics of the seat
  • 4 weeks later...

Hey mate,

Coilovers are currently on hold pending payment at end of this week. Will let you know their availability either way on Sat.

Cheers,
Pete

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've got a 2011 J50 that I imported six years ago. The unmodified factory AV system date and time has always been correct ( Japanese timezone of course ) up until last month. About two weeks ago, at engine start, the system wished me a happy new year ( in Japanese of course ). I can't think of anything that would make the system think that the date had changed, unless the GPS component has failed/reset somehow ? I checked the GPS reception in the system settings, and it can still see the satellites. Has any other J50 owner had this happen ?  It's no biggie, just annoying that it tells me the wrong date anytime I start the engine. 😅
    • Love following your adventures on IG, hopefully if you're still around in Japan when we visit again wouldn't mind going for a few beers with you (that's if you're keen on hearing how I hate Nissans).
    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
×
×
  • Create New...