Jump to content
SAU Community

HKS 2835pro S

lindsey34
 Share

Recommended Posts

whatsisname Grand Master

whatsisname

Posted
Posted

Although he's currently offline due to work commitments, Grepin (SAU nick) is your man! He has a HKS GT2835 ProS fitted to his GTS25t.

Have a read here - http://www.skylinesaustralia.com/forums/sh...ead.php?t=30551

Link to comment
https://www.sau.com.au/forums/topic/41907-hks-2835pro-s/#findComment-858279
Share on other sites
grepin Experienced

grepin

Posted
Posted

lindsey

The thread whatsisname pointed out should pretty much cover it. I have exh manifold and plenum as you can see so doesnt really help you. I cant get on the net much however pm me with any further questions. Or I will be back on about the 16 th Jun if you want to chat. The turbo will fit on a standard manifold however the comp housing needs to be turned a little to clear. That was only a quick check when I first got it so not 100% sure.

Link to comment
https://www.sau.com.au/forums/topic/41907-hks-2835pro-s/#findComment-863116
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      I'm guessing you mean something like this size? https://www.supercheapauto.com.au/p/bodyworx-bodyworx-hard-soft-sanding-block---70-x-135mm/594184.html?cgid=SCA01100303#srsltid=AfmBOoq_qZTEe3boann9BaHiB2f59dxJlosWLzCr0zm_weHgUlDX-N5f&start=6 Are they sanded completely flat?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Just a standard sanding block size. With the rock chipa they are quite small. I sanded them as you could feel the edges. 
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Say you've just laid all your filler and your about to start sanding, how large is the sanding block your using?  Like a high fill primer? Technically possible but would be a nightmare. Just guessing from the photo, but they look small enough that you might get away with using a 1k spot putty. Normally you'd use something like this on pinholes but with the type of project you're working on I'd give it a go. 
    • Shizu
      Sheraaz's R34GTT Build

      By Shizu · Posted

      Omg Brake pedal removal.. FML!!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
×
×
  • Create New...