Jump to content
SAU Community

Recommended Posts

Just started looking at a r34 auto to get built from mz autos. Should hold the power abut better than the vl box in there now.

Re tune booked in from status for this Friday. Should be interesting when done.

4N71B trans went bang ? Try to get a nissan Y31/32/33 trans if you can, the Re series of autos out of these cars are near on bullet proof (when kitted out)and mv trans in s.a have done a few

Bell housing from rb bolts onto vg easily

Good that you are keeping an older nissan alive

There doesnt seem to be much appreciation for these classics

4N71B trans went bang ? Try to get a nissan Y31/32/33 trans if you can, the Re series of autos out of these cars are near on bullet proof (when kitted out)and mv trans in s.a have done a few

Bell housing from rb bolts onto vg easily

Good that you are keeping an older nissan alive

There doesnt seem to be much appreciation for these classics

Thanks I got a trans from a r34 going to mv today for a full build. Should hold upto the abuse well I think. At least I can get a better converter this time. Lol
  • 1 month later...
  • 2 weeks later...

Had a slight issue with the new trans. The pump bush seized onto the converter snout in 5 mins of driving. Box out and thanks to mv autos it's fixed and due back to me this week for install and fun over the weekend

Thanks to mv autos box is back in and works well. Loves to skid now. I have found boost control issues now. Boost climbs well over 25psi with wheel spin but steady with none. I guess it's time to go external gate now

  • 2 weeks later...

How's the auto holding up. How much better is it then the auto you had.

What gears have you got in the diff. Does it driver better then before (cruising / power runs)

I like this box a lot more than the other one. It shifts a lot faster. Second to third is instant before had a delay.

I have 3.7 diff gears. I would like 4.11's but they are very hard to find.

The box is very smooth when shifting on the converter and very hard when under power. The lockup clutch keeps the temps down on the highway too

Best money spent on the car so far

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...