Jump to content
SAU Community

Motec M800 , Aim Digital Dash, Aem 8 Channel Cdi Unit, Mca Proflex Suspension

Tektrader69
 Share

Recommended Posts

Tektrader69 Rising Star

Tektrader69

Posted
Posted

Race car build is aborted so selling heaps of aftermarket race gear.

M800 like new complete with loom can cable, manual. sell $3500 paid $4500

DSC_3045_044_DSC_3045_zps4985e0d2.jpg

AIM digital dash as new unmarked sell $1100 Paid $2100

DSC_3013_012_DSC_3013_zps5cd2c993.jpg

AEM CDi unit 8 channel all cables and manual New unused and unboxed sell $340 Paid $550

DSC_3003_002_DSC_3003_zps94a82f7a.jpg

Proflex MCA suspension for Z32, R32

New unused, has been bolted on the car on the hoist for the last 3 years. Adjustable compression and rebound $4500

Top quality race coilovers custom made. They dont get much better, Where $7000 when purchased.

Tim GTR Proficient

Tim GTR

Posted
Posted

Seen your ad in 105.com, good luck with the sale, MCA is the top shelf stuff, unfortunately my built is GTR33, got a set of track spec Beilstein, non adjustable for rebound and damping. can't wait to sort them out when car is ready in a couple of weeks, Z32 won;t fit my car.

good luck

cheers

Tektrader69 Rising Star

Tektrader69

Posted
  • Author
Posted

Thanks matey, I havent got an ad on MY105 though. I am pretty sure these coilovers will fit on an R32. But I am no expert on R32's :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Celticsfan03
      Engine sputter

      By Celticsfan03 · Posted

      I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • niZmO_Man
      How To: "Refabricate" a Stagea 260RS/R33 GTR Speedo Sensor

      By niZmO_Man · Posted

      Fantastic info, thanks for sharing!
    • niZmO_Man
      S1 Autech 260RS Wiring Diagrams

      By niZmO_Man · Posted

      That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • niZmO_Man
      R34 Gtt Wheel Offset Advice

      By niZmO_Man · Posted

      ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • niZmO_Man
      Tein Circuit Master- rebuild worth it?

      By niZmO_Man · Posted

      Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...