Jump to content
SAU Community

Recommended Posts

Thought it was about time I gave a bit of details about my motor since I've been using this forum a fair amount. I'd been saving for an Imprezza when a friend pointed this out to me and for £1100 at new year I ended up with a RS4 Stagea:

Stagea_zps370106fa.jpg

First job was to get rid of the "jdm" stickers on the back, and got rid of the rs4 and nismo badges on the back too. Stageas are very rare over here so wanted these off to it doesn't look too special, going for a sleeper effect:

PC300161_zpsd0926a92.jpg

After:

DebadgedRear_zpsdd89f5a8.jpg

Didn't have any mats so managed to get a set of r34 gtt ones off a friend, and fitted an alpine headunit:

AlpineStereoIn_zpsb831699c.jpg

Took the door cars out to look at the speakers and found they'd already been replaced with Sony ones, winner!

Ordered and fitted some BC coilovers in some fine British weather which improved the handling a hell of a lot:

Lowered_zps32b38ece.jpg

Not sure if the laws the same in Oz, but over here you need to have a rear fog light, so all imports have to have a hanging one fitted which doesn't look great. As the Stag has two reversing light and you only need one I simply cut the feed to one, put a red bulb in and wired the fog light up to it, making the back end look tidier:

RearWithoutFogLight_zps00ecba02.jpg

Next the car went into a bodyshop for a week to have the rust below the wing mirrors sorted, along with under the bonnet at the top of the suspension. This eliminated all of the rust on it.

Had a very busy weekend following that where I removed the airbox and put a HKS mushroom filter in, adjusted the coilovers, fitted 350Z wheels and replaced the exhaust with a Blitz Nur Spec R system, decat, and 3 inch downpipe. A subtle but deep tone from the exhaust now.

AirFilterFitted_zpsa69c12aa.jpg

Exhausts_zpsa6715965.jpg

ExhaustOn_zps952ae13d.jpg

CoiloversAdjusted_zps8213d7bb.jpg

Brought a set of R32 Gtr front seats and some sabelt double release 4 point harnesses to help keep my ass in place while driving:

Seats_zpsd412e6aa.jpg

Then a HKS EVC4 for boost control and also acts as a boost gauge:

EngineBay_zpsb7e15c3e.jpg

BoostControllerOpen_zpsd597071b.jpg

Then got a set of R33 GTS-T brake calipers were then bought, I painted them and fitted them with red stuff pads and dimpled and slotted pads:

FrontBrakesNew_zps3b3c00d3.jpg

RearBrakesNew_zps6683a6c9.jpg

This is now where the car currently stands after I've owned her for almost 3 months. All the work has been done by myself (apart from the rust repair) with the help of friends.

Link to comment
https://www.sau.com.au/forums/topic/421850-liammph-uks-rs4/
Share on other sites

well done liam ,it's proggressing nicely, some cosmetics( body kit) and engine management(safc etc) and your nearly there......and then when you get bored with that stick in a rb26 and manual box :rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/421850-liammph-uks-rs4/#findComment-6786993
Share on other sites

Not really going to do anything else with the body, don't want it looking fast, love the look on people's faces when it flies past. Manual box and hybrid turbo is the next job, then fmic, remap and a few other bits and pieces and should be running around 400bhp

Link to comment
https://www.sau.com.au/forums/topic/421850-liammph-uks-rs4/#findComment-6786997
Share on other sites

The new wheels and coilovers make a huge improvement on the appearance. Nice one.

I always think that they look slightly naked without a rear wing, but that's probably because mine is... well, large.

C34rear_zpsb3992440.jpg

Photo credit: Previous owner (SmokeyV35)

Link to comment
https://www.sau.com.au/forums/topic/421850-liammph-uks-rs4/#findComment-6787610
Share on other sites

I reckon chuck some s2 tail lights in as well always look cleaner, I agree with marshstag big rear wing finishes stag lines off perfectly I like them so much I got two rear wings , good job

post-76904-0-10547800-1363611429_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/421850-liammph-uks-rs4/#findComment-6787934
Share on other sites

  • 3 weeks later...

s2 tail lights are just the clear looking ones, just makes it look a lot more modern

have a look on ebay for an autech rear spoiler too, i reckon they look the best!

You must be doing pretty well over there with the snow at the moment, the manual box will make it a lot more fun :P

Link to comment
https://www.sau.com.au/forums/topic/421850-liammph-uks-rs4/#findComment-6803319
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...