Jump to content
SAU Community

Recommended Posts

Licensed 1990 R32 GTR gun metal grey that I personally imported from Japan in 2005. The car is licensed and comes with 6 months WA rego and was always well maintained with Motul oils and was tuned by Hyperdrive. I decided to sell the project due to poor health.

Since owning the GTR I had done a few modifications and decided to strip the engine bay etc for a full respray when some person decided it would be a good idea to key it all over. At the moment the engine , gear box and engine bay components have been taken out ready for a respray, all interior is still in place. The body is rust free.

The engine had no issues when it was in the car and had about 160psi in all six pots.

Modifications done so far are as follows:

Engine:

  • Tomei Type B 260 cams
  • Tomei cam caps
  • Sard 700cc injectors
  • K&N pod filters and pipe work
  • Spitfire coils
  • Garret 2860-5 turbos
  • Sard Ali racing radiator
  • Sard fuel regulator
  • Full Monty clutch
  • Trust intercooler
  • New CV joints and boots
  • Bosch 044 in tank fuel pump



Brakes & Wheels


Fully rebuilt front brake callipers
Stock R32 GTR Rims
New Brake Lines
Tein Super Street Coilovers
Nismo clutch slave

Electronics

Apexi Power FC and Hand Controller
Blitz Dual solenoid EBC has LCD display
Full White Nismo Dash & centre console


Not Yet Fitted

New rubbers, badges, seals and mouldings for whole car ( Over 2.5K+ alone)
Complete engine seal and gasket kit.
Spare front seats
New silicone hose set for engine

New genuine hose set for engine
Kakimoto dual exhaust
R34 Dump pipes ( better flowing then stock R32 items) "photo not taken yet"
Tomei 2mm oil restrictor
Fully refurbished R32 gear box "photo not taken yet"
Mines Baffle kit "photo not taken yet"
Tomei sump baffle kit "photo not taken yet"
GREX oil pump

6Boost Manifold for single top mount

New Garrett Gtx3582R

Nismo engine mounts

New handles

New handle surrounds

2.8L Fardon Stroker crank ( where HKS got their cranks ) Step two crank

Apexi intake kit

Arp head and engine bolts

ATI 1000hp balancer and pulley kit

Carbon fibre rear strut

DBA 4000 rotors

FC data logit

Pauter rods

new set of tein coilovers

And anything else I missed from list.

That's all I can remember for now. Car was never tracked, taken to drags or thrashed.
Chasing for whole package is $17,000.

NO SWAPS NO TRADES NO PARTING OUT

Rob 0413 670 040 or email [email protected]

post-25605-0-20721000-1363580958.jpg

post-25605-0-26953700-1363580965_thumb.jpg

post-25605-0-95457100-1363580965.jpg

post-25605-0-35765100-1363580966.jpg

post-25605-0-94447700-1363580966.jpg

post-25605-0-61396500-1363580967.jpg

post-25605-0-25812000-1363580968.jpg

post-25605-0-67544100-1363580968.jpg

post-25605-0-70361200-1363580969.jpg

post-25605-0-53092400-1363580970.jpg

post-25605-0-80544100-1363581043.jpg

post-25605-0-27797700-1363581044.jpg

post-25605-0-70706100-1363581044.jpg

post-25605-0-23036100-1363581045.jpg

post-25605-0-71883300-1363581045.jpg

post-25605-0-31011900-1363581046.jpg

post-25605-0-06429000-1363581048.jpg

post-25605-0-06877700-1363581049.jpg

post-25605-0-67133800-1363581049.jpg

post-25605-0-65716700-1363581050.jpg

post-25605-0-06956900-1363581142.jpg

post-25605-0-07699200-1363581143.jpg

post-25605-0-26692500-1363581145.jpg

post-25605-0-48562300-1363581146.jpg

post-25605-0-56830200-1363581147.jpg

post-25605-0-60579900-1363581148.jpg

post-25605-0-81894500-1363581149.jpg

post-25605-0-91344300-1363581150.jpg

post-25605-0-99766100-1363581151.jpg

post-25605-0-09902000-1363581153.jpg

post-25605-0-49748200-1363581210.jpg

post-25605-0-87492300-1363581210.jpg

post-25605-0-75364300-1363581211.jpg

post-25605-0-58014600-1363581212.jpg

post-25605-0-97435800-1363581212.jpg

post-25605-0-53195000-1363581213.jpg

post-25605-0-99473000-1363581213.jpg

post-25605-0-10782000-1363581215.jpg

post-25605-0-88166200-1363581215.jpg

post-25605-0-68186500-1363581216.jpg

post-25605-0-88014800-1363581314.jpg

post-25605-0-21993500-1363581315.jpg

post-25605-0-73827000-1363581315.jpg

post-25605-0-16258200-1363581316.jpg

post-25605-0-55888900-1363581316.jpg

post-25605-0-12232000-1363581317.jpg

post-25605-0-51609100-1363581317.jpg

post-25605-0-98197200-1363581317.jpg

post-25605-0-39342000-1363581318.jpg

post-25605-0-89881200-1363581318.jpg

post-25605-0-34652400-1363581357.jpg

post-25605-0-73246000-1363581357.jpg

post-25605-0-14937100-1363581358.jpg

post-25605-0-69046300-1363581358.jpg

post-25605-0-10314100-1363581359.jpg

post-25605-0-62224900-1363581359.jpg

post-25605-0-01875400-1363581360.jpg

post-25605-0-58515400-1363581360.jpg

post-25605-0-01743000-1363581361.jpg

post-25605-0-56445200-1363581361.jpg

post-25605-0-26678000-1363581380.jpg

Link to comment
https://www.sau.com.au/forums/topic/421870-r32-gtr-unfinished-project/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
    • @Stringycheese  Have you only gone to the one blue slip workshop?  There will be a heap of them where ever you live, good odds that the next place you go to will pass the car.  Unfortunately (or fortunately?) every blue slip / engineering workshop will be different and will be happy passing or failing different things - despite working from the same set of rules. It's kinda like 2 lawyers arguing over a piece of legislation, each saying their interpretation is correct. Might seem strange that this happens when it comes to getting a modified car passed, but this is very much a thing. A big part of the game is finding an engineer / workshop that is on the same page as you.
    • Bah. I daily mine. ~60km per work day, 10-12 thousand km per year. What's the point of having a dirty old Datto and leaving it in the shed. It needs to be driven and enjoyed while the govco allows us to do so. It will only be a few years before we're forbidden to even start up internal combustion engines.
    • Judging by that spring perch and the normal looking spring on it - not a coilover. Well.... it is a coilover, just a stock format coilover, rather than what everyone calls a coilover.
    • Yes it is. We get stock from Nismo directly. I'm happy to take photos/video of it as proof before I ship it with timestamps or whathaveyou.
×
×
  • Create New...