Jump to content
SAU Community

Forsale 1990 R32 Gts-T Track/drift - Partial Complete 8500Ono


Recommended Posts

FORSALE



1990 R32 GTS-T Track/Drift - Partial Complete



8500ono or Swaps



Located Near Bribie Island, Queensland


Contact Mark on 0434 713 600



The inteior is stripped out, the sound deading has been removed, most parts are fitted, cage needs to be welded in, seats need to be fitted, dash needs to be refitted, exhaust has to be made, Fuel pump and surge tank needs to be fitted. Have spent alot of money on it, the new parts alone are worth over 15K, sadly Im trying to buy my first home and need to sell it.


Will post Pictures tonight.


Comes with everything to finish the car apart from an exhaust



Engine Parts



RB25DET Engine and RB25DET Gearbox (Fitted)


YellowJack Coil Packs (Fitted)


MicroTech LT12s Ecu/hand controller, x6 ignitor, R33 Direct Plug In Loom Adapter (Fitted)


6-Boost Manifold High Mount (New Never Used) (Fitted)


50mm TurboSmart WasteGate (New Never Used)


Kinugawa Turbocharger 4" Anti-Surge T67-25G T25 10 cm V-Band Housing (New Never Used) (Fitted)


Dynamic injectors ID1000 (New Never Used) (Fitted)


bosch fuel pump 040 (New Never Used)


Surge Tank (New Never Used)


Oil Cooler (New Never Used) (Fitted)


Front Mount Intercooler


SpeedFlow fittings



Suspension



BC Racing Coilovers (New Never Used) (Fitted)


KKR HICAS Elimination Kit (New Never Used) (Fitted)


Front Camber Arms (New Never Used) (Fitted)

KKR Castor Rods (New Never Used) (Fitted)

KKR Rear Camber Arms Type 1 (New Never Used) (Fitted)

KKR Rear Traction Arms (New Never Used) (Fitted)

Aluminium Cradle Bushes (New Never Used) (Fitted)

Extra Lock Spacers (New Never Used) (Fitted)


Interior


Bride Zieg III - FRP x 2 seats (New Never Used)

8-Point Bond RollCage - not assembled (New Never Used)

Racing harness x 2 (New Never Used)

Oil Temp Gauge (New Never Used)

Oil Pressure Gauge (New Never Used)

Fuel Pressure Gauge (New Never Used)

Water Temp Gauge (New Never Used)

A/F Ratio Gauge (New Never Used)


Wheels


Rota Boost 18x10 with 4 new tyres

17x8 unknown rims 4 tyres 30%


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...