Jump to content
SAU Community

Recommended Posts

as some of you may know i am going down the E85 road.

my question is the guys that are using it do you use your car everyday?

i have been speaking to to a few people and they have said if i am only using it on weeks ends it will causing me more problems as the fuel will drop to much octane over the week and will eat out my fuel lines?

they said to run fresh fuel everytime -

i will only be driving it the odd day during the week and same as some weekends.

what peopls experience / opinion.

Link to comment
https://www.sau.com.au/forums/topic/422362-e85-useeffects/
Share on other sites

The people who you are speaking to have no idea.

I have run E85 for over 4 years, the car is lucky to be driven a dozen times a year. Before a drive the car is topped up with fresh fuel and away I go.

Sealed containers of fuel will last for months.

Link to comment
https://www.sau.com.au/forums/topic/422362-e85-useeffects/#findComment-6795246
Share on other sites

That my thread and info is not in there hence this post -

NYTSKY - i dont mind having to top it up every now and then i guess i am more worried that it will eat through my fuel line and destroy them -

if i have to put new lot of fuel in every week i wont bother with it as i wont use a tank that quickly

Link to comment
https://www.sau.com.au/forums/topic/422362-e85-useeffects/#findComment-6795266
Share on other sites

That my thread and info is not in there hence this post -

NYTSKY - i dont mind having to top it up every now and then i guess i am more worried that it will eat through my fuel line and destroy them -

if i have to put new lot of fuel in every week i wont bother with it as i wont use a tank that quickly

Nah man it shouldn't eat through your lines that would be if your probably left it for a long time without use,just have to empty the tank run 98 and leave it. The only thing that ive found is that you need to get supporting mods that can handle the alcohol content otherwise you shouldn't have any problems with the fuel line, that's probably the least of your problems. I'd be more worried about the consistency of your fuel because it could throw out your tune and depending on how aggressive the tune was it could go pop.

I don't think they meant that your octane will drop but they meant your mileage will drop, since E85 has a lower energy density meaning it burns more to produce the same as regular petrol.

http://www.injectordynamics.com/AlcoholArticle.html

Have read at this site might be worthwhile INJECTOR DYNAMICS wrote it.

They are still fixing the site so i cant dig up the thread its under Forced Induction

Link to comment
https://www.sau.com.au/forums/topic/422362-e85-useeffects/#findComment-6795520
Share on other sites

thanks for that -

i think i am gonna look into the haltech elfex sensor, apparently its great to help your map adjust to different levels might look into that beofre i go into the e85 - with the mods i have my tuner said to put in a surge tank and 2 x 044 which i done so i guess everything else is ok - might have another chat with him before i decide

Link to comment
https://www.sau.com.au/forums/topic/422362-e85-useeffects/#findComment-6795930
Share on other sites

  • 1 month later...

i have recently seen this walbro pump for e85... what about the normal pumps are they know to fail with e85? i am having the car tuned this thursday on e85 first time no one said anything about my intake pump (currently walbro 500hp in tank pump) pumping to surge tanl the bosh 044 to fuel rail.

what are you guys using as intanks..?

Link to comment
https://www.sau.com.au/forums/topic/422362-e85-useeffects/#findComment-6858531
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...