Jump to content
SAU Community

Vic: R33 Rb25Det S1.5 273Rwkr Engine

Steg33
 Share

Recommended Posts

Steg33 Community Regular

Steg33

Posted
Posted

VIC: R33 RB25DET S1.5 273RWKR ENGINE

Since getting a work car 4 years ago my skyline has sat under cover in the driveway and only done 1000k’s or so. With it costing reg and insurance it’s time to sell it up and move on to the next hobby. I’m looking to break it up starting with the engine only seeing as it’s worth the most (over $10,000 in receipts spent on toughening it up).

It’s a strong, well maintained engine with oil and filter changed every 10K kms. It’s still in the car and running to be seen. It’s done 56K km since the rebuild (156K kms total on car). It did 600kms on the freeway each week for 2 and a half years so it’s been a pretty easy life since the rebuild.

Engine

RB25DET S1.5

Power

273rwkw (with dyno sheet)

Head

Ported & polished with angle cut valves and Tomei head gasket

Pistons

Forged - Venolia USA

Cylinders

Machined and sleeved

Rods

Shot peen strengthened

Crank

GTR

Injectors

Denso 740cc

Airflow meter

Q45 Infinity AFM

Air filter

Pod – could do with replacing

Turbo

Custom: Ball bearing: Equivalent to GT2876R? Compressor – A/R 0.70, HKS exhaust housing – A/R 0.64.

Wategate

Internal

BOV

GReddy

Boost controller

Simple bleed valve

ECU

Power FC tuned rich for the motors longevity

Asking $3,900 for all of the above. Negotiable and may break further depending on interest.

Once the motor’s SOLD the rest of the goodies in the car will appear here…

  • Gearbox with short shift kit / full drivetrain.
  • Impul light weight racing rims (17in white 5 spoke).
  • GTR rear spoiler / Veilside pods / skirts.
  • Full black coloured body with resprayed roof and bonnet.
  • Blitz 3in catback exhaust / x-force dump-front pipe.
  • Apexi intercooler.
  • Recaro seats.
  • Nizmo 300km/h dash cluster.

OR…. $8,400 for the whole car as is.

post-7819-0-77955100-1364472330_thumb.jpg

post-7819-0-40761500-1364472937_thumb.jpg

post-7819-0-52411700-1364472970_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/422534-vic-r33-rb25det-s15-273rwkr-engine/
Share on other sites
Steg33 Community Regular

Steg33

Posted
  • Author
Posted

Motor's still available. Some interst but not enough to break it up into single pieces.

Any reasonable offers considered but please no timewasting dreamers because I won't be given away for what it is.

  • 1 month later...
Steg33 Community Regular

Steg33

Posted
  • Author
Posted

It's begun......

Deposit taken on the motor in pieces.

Still for sale are injectors, Power FC (no controller), BOV, turbo, dump/front pipe etc...

Anything required to keep it rolling will not be for sale "yet".

Just being dismantled so prices to come.

Reasonable offer considered in the mean time.

  • 3 weeks later...
Steg33 Community Regular

Steg33

Posted
  • Author
Posted

Hi guys,

I'm after $650 for the power fc without a hand controller.

The cluster I'm after $350. The tacho is playing up but the price is purely for the nizmo speedo as part of the cluster.

Steg33 Community Regular

Steg33

Posted
  • Author
Posted

Cluster pics are in the post from when it was going to get sold as a car:

http://www.skylinesaustralia.com/forums/topic/422952-vic-r33-gtst-95-s15-273rwkr/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...