Jump to content
SAU Community

Recommended Posts

Hey guys, not exactly new to the SAU community but new to the Stagea community.

Went today to look at two white series two RS4S manuals today, and although both exceeded my expectations (first two I've looked at), the second one especially impressed me!

Number one- http://www.carpoint.com.au/all-cars/dealer/details.aspx?R=AGC-AD-13536037&Cr=12

Number two- http://www.carpoint.com.au/all-cars/private/details.aspx?R=SSE-AD-2042842&Cr=14

Some might wonder why the first one lost out, as it has rims, suspension (turned out to be fully adjustable nismo coil overs), extra body kit, and twin sunroofs....as well as a cat back 3" exhaust and braided brake lines that weren't listed. Although awesome to look at, and it drove well, there were signs of rust in all of the usual spots except the strut towers, and a few cracks in the kit, as well as the higher km's. Price wasn't an issue, as I would have happily paid that if the car was as good as the second, and if the second one had sunroofs.....I F***ING LOVE sunroofs.

But here's why the second one won! I won't speak too soon as I sill have to the second one tested by Stateroads on Tues, but from my close inspection and test drive, it looks be be in awesome condition :D

VERY straight clean body, no rust in the strut towers, rear hatch under the rubber, in the spare wheel cavity, or in the wing mirrors!! I actually couldn't believe it, as i was prepared for a little rust here and there, but to find none was bloody awesome!

Interior was very tidy as well, very minimal steering wheel or gear knob wear and the floor of both the driver and passenger footwell was almost spotless. Drove really smooth, easy clutch action with a nice tight box (lol). Only thing i could fault from my fairly thorough inspection/test drive was that the 3 factory center gauges (torque split/volts/boost) weren't working. Is that a relatively easy fix??

I found it to be not overly powerful, but I am coming from a 185awkw RVR Hypergear, so I wasn't expecting the same kind of pull. But that can be fixed, quite easily ;) Not my first rb25, I owned an R31 coupe (hence my user name) with a 25 transplant back in '02/'03, very cool car!

Now all i have to do is play the waiting game on the vehicle test, cross my fingers it all checks out as well as it did with me, and I'll be in a shiny new ride!!

Oh, and then go and visit Prestige Sunroofs, to complete the package ;)

Edited by gts_koop
Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/
Share on other sites

Fairly sure i bought my stagea off the same guy thats selling the second one you posted.

Mine was around the same Km's, a year older and a RS4S but the Dayz edition - 2 sunroofs factory ;)

Still happy with my purchase from him and it all went pretty smoothly, havnt had any issues with my one yet, and i dont expect to being a Nissan! lol

Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/#findComment-6799517
Share on other sites

Yeah price seems right if like you say, the KM"s are real KiwiRS4T And yep, if a swap of roofs was possible, I'd jump at it lol

Cool, glad to hear the positive feedback nick88, he seems like a pretty genuine dude...as far as importers go (as we know, they're all a little dodgy ;P)

And yep, not my first Nissan, usually dam tough units.But i will be breaking his balls if things aren't right ;)

Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/#findComment-6799549
Share on other sites

Two minor things with second car.

1. Looks like the factory front strut bar got removed. They all come with them from what i recall.

2. Hopefully the aftermarket rear antenna can be removed without damaging the paint ( if not already damaged ). What is that antenna for do you know ? There is a cable you can buy to allow head decks to use the factory built in boot window antenna's.

Looks very clean and you can determine the mods you want to do, not undoing mods already done to your disliking.

Price is great too on the 2nd one so i think it's the winner !

Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/#findComment-6800887
Share on other sites

Yeah marshstag the subtle dayz add ons are perfect imo, not over the top but adds just that little bit to the overall look. The front bar of the first one is infact stock with just a bolted on add-on as far as I was told. Was loose and cracked, put me off. Plus getting up my driveway wouldn't have done it any favours.

And Jezboosted, cheers for the heads up on the strut brace.... I didn't know they were supposed to be there standard, will chase one up if that's the case. And the antenna is just clamped there, I have no idea what it runs as there is a plethora of screens and cd/dvd players and stacker inside lollll....standard jap stuff really :P

Hanging for the vehicle test feedback, by around 6-7 tonight I'll know if It's a genuine car or weather I keep looking....fingers crossed it gets a thumbs up!

Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/#findComment-6801569
Share on other sites

So the vehicle test came back with a very positive conclusion! The bloke rang me and from the get-go, he was extremely impressed himself.

He said the only thing he could really fault was the left front shock was leaking and probably f**ked, but will be part of rhe rwc so all good there.

So deposit is down, and now I have to distract myself for a week or two while it finishes It's compliance process and registration etc. I can be very impatient, but I'll try my best to stay cool and wait patiently loll

Marshstag do I have to wait until It's compiled to look into the VIN details?

Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/#findComment-6802448
Share on other sites

Marshstag do I have to wait until It's compiled to look into the VIN details?

Nope - it's a Nissan database which should tell you about information about the vehicle as it came out of the factory. Just go to the thread that I linked above and request the search to be done on WGNC34131995

Edit: Also - one of the first mods you'll probably want to do is a nice set of coilovers, so the left shock shouldn't be too much of a worry!

Edited by Marshstag
Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/#findComment-6805295
Share on other sites

Mine has Greddy Coilovers with custom uprated Eibach springs in the rear to support heavier wagon rear.

They were fitted by the previous owner so I can't tell you much about them, other than the ride is great and it looks awesome :cool:

I'm not sure what others are running, but the answer will be here somewhere...

Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/#findComment-6805783
Share on other sites

I too are running Greddy coilovers, don't really know much about them either but bought it from someone who imported it with his stagea.
BC's are pretty much the go unless you want to spend quite a bit more for Tien's.

Link to comment
https://www.sau.com.au/forums/topic/422633-noob-saying-hi/#findComment-6805943
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...