Jump to content
SAU Community

How To Get Your Steering Wheel Stereo Controls Working

richzx

By richzx,
in Four Door Family & Wagoneers

 Share

Recommended Posts

richzx Community Regular

richzx

Posted
Posted (edited)

Well after a lot of time messing around on the net and doing my research I bought this:

067-1.jpg

I thought it would be ideal because it had bluetooth connectivity and was steering wheel remote ready and thanks to Commsman who sourced and supplied the buttons I have steering wheel controls with my cruise control. I did some research and came to the conclusion that this unit was the one for me because it had orange illumination similar to the factory colours. What I didn't take into account was all the usb, aux and mic ports were at the back of the unit and needed to be plumbed into the car somehow.

Some more research later and I decided that I need an Xtrail loom to make the steering controls work with my new head unit, so I bought this from the U.K.

068.jpg

It actually had ISO plugs on it the loom which I cut off to mate to my JVC loom which I rigged up to put in and test out. So I'm all ready to go, I just have to connect that brown wire at the bottom of the picture to this wire:

069.jpg

How easy is that????? Not very it turns out!

I pulled my dash apart with some guidance from Jetwreck and the youtube tutorial and went to install it. DOH! The body loom plug is incorrect and because I've hacked the ISO plugs off, I can't send it back. To say I was pissed is an understatement because I was misled, in my opinion, by the ebay seller who said it was plug and play.

Anyway, undeterred I tried again with an Aussie seller that was double the price but was assured it was plug and play. When I got the new unit it looked identical to the previous one but with different body plugs(!) and the brown wire was still loose and they had the jack plugs connected. I trusted that it was right and just plugged it all in and the stereo was working, a small win! After driving for a few days I found the radio reception was rubbish and it really annoyed me.

Then my luck changed! I got onto these guys:

http://www.yellowpages.com.au/tas/launceston/car-accessory-installs-12430245-listing.html

Ky went through everything I did and discovered that I hadn't pulled out the FM expander that was there for the Jap spec stereo. So, I pull it all apart again and then drove the car down to them to look at. Ky stopped working on another car and fixed the reception issue by removing the fm expander and looked at the control box and loom I bought and thought that one of the wires was wrong as did I. Anyway, he snipped the jack plug off and connected the brown wire to the blu wire with yellow stripe and success!!!!!! Steering wheel controls work!!!!

071.jpg

Pretty.

070.jpg

So how much did Car Accessory Installs charge me for this? Not a thing!!!

I drove home and put it all back together and routed the ipod plugs and bluetooth microphone through my ashtray.

072.jpg

Voila! I am one happy camper right now.

I wish I had of taken my car down to Car Accessory Installs in the first place as they have converter boxes that can be tuned to ANY head unit to make your steering controls work as long as the head unit supports it. They also sell all the accessory's required to make it work so a free plug for them.

Now I have cruise control which I love and steering controls which work.

Edited by richzx
Commsman Veteran

Commsman

Posted
Posted

Good one Rich! Great to see you've (finally) had success & worth a free plug to a business who looks after you so well.

Hope they get rewarded by heaps of paying customers turning up on their doorstep.

richzx Community Regular

richzx

Posted
  • Author
Posted

Excellent work!

Good to see a local business supporting enthusiasts! One recommendation can get you tonnes of business.

​Link to moccasin purveyor? :whistling:

These guys are great for mocco's! I just bought my bro in Sydney a pair and he's here tomorrow for the Supercars.

http://www.allgoods.com.au/

  • 2 years later...
stripey Collaborator

stripey

Posted
Posted

Ill just bump this thread up a bit as i now own this stagea and jvc head unit is showing age and stole one of my cds and refuses to give it back. I have installed a pioneer head unit that has a small audio style jack for input of steering wheel controls. Can u use jack from the aerpro control unit and plug straight in to back of stereo? I ahould have asked before i put it all back together but its an easy job

Daleo Grand Master

Daleo

Posted
Posted

You should be able to; the control only uses 2 wires.

The control just uses a bunch of different resistance values that are then programmed into specific functions.

When setting up, I'd imagine it will ask you that press a button for a specific function, then allot that resistance value for a particular command.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...