Jump to content
SAU Community

Recommended Posts

Hi all,

I am selling a few of my R33 RB25 parts - some are used and some are still in boxes new.

I was in the process of doing a massive turbo upgrade - but decided to buy another car instead.

Brand New Parts:

- Exedy Heavy Duty Cushion Button clutch rated to 320rwkw while still maintaining driveablity on the street. Comes with spigot bush and rear main seal to suit RB25. Price: $550 negotiable (have receipts if needed) BRAND NEW IN BOX

post-76956-0-81153800-1365736055_thumb.jpg

- Turbosmart Hypergate 45mm V-band New style External Wastegate - This must be run with aftermarket manifold, will not work with standard setup. Only opened box to take photos. Price: $420 negotiable. BRAND NEW IN BOX Bought from GCG can supply receipts Original Turbosmart not copy

post-76956-0-52812500-1365735914_thumb.jpg

post-76956-0-50602600-1365735957_thumb.jpg

Used parts:

- Plazmaman RB25 forward facing Intake Plenum - comes with all studs, gasket and hose to fit. This runs off stock runners. Very easy to install. This is the only plenum on the market that has proved to gain power and fit properly. Can also be fitted to R34 with slight modification to jump starter box. Painted and polished in gloss black. Can be sand blasted and polished to chrome finish if desired.

Price: $600 negotiable. (these retail for $850 from plazmaman)

post-76956-0-69793400-1365735813_thumb.jpg

post-76956-0-57249500-1365735839_thumb.jpg

- Turbo Genuine Garrett GT3540 (GT3082R) - T3 flange, 4bolt 3inch gt exhaust flange 0.63. 4"inlet 2" outlet 0.7 compressor. This is the monster 35r compressor wheel on a smaller quick spooling 30 series housing. Dual ball bearing, water & oil cooled. Only ever run on fully synthetic oil. Only run 10xxx km. Price: $650 negotiable.(GCG have checked the turbo over and said it is in good condition) Will also throw in Exhaust flange gasket and T3 gasket.

post-76956-0-06018600-1365735995_thumb.jpg

post-76956-0-76658700-1365736016_thumb.jpg

post-76956-0-27738200-1365736030_thumb.jpg

I am not in a rush to sell these parts, so please no unreasonable offers. I am happy to negotiate with serious buyers.

Parts can be picked up from either Maroubra Beach or Revesby.

Thanks,

John

0403569075

If I don't answer - text me and I will get back to you when I can.

Link to comment
https://www.sau.com.au/forums/topic/423402-rb25-performance-parts-r33-sydney/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...