Jump to content
SAU Community

Recommended Posts

So guys I picked up a c34 stagea series 2 manual in bayside blue. Want to do a build on a budget so thinking of the cheapest easiest way to get around 240rwkw?

ATM car is stock as a rock. Other then a 3" catback exhaust.

Want some advice on my cheapest easiest way to get this figure reliably. All work will be done by myself other then the tune.

Started looking at coolers wondering if I can get away with a 33gtr cooler and fab something up to join up to the stock return pipes relatively easily? Only reason I've got a mate who is giving it to me for nothing.

Next things I had in mind:

A quiet TBE

Ecu probs nistune if I can pick one up

Fuel pump

Injectors

Z32 Afm

Turbo?? Not sure what's best for stock location. I'd like response so not interested In a big blower.

Need the car to look as stock as possible.

Any advice would be greatly appreciated guys.

Link to comment
https://www.sau.com.au/forums/topic/423444-bayside-blue-c34/
Share on other sites

Get the Nistune board from Nistune (not too expensive new)

Get your turbo modified by Hypergear (or if you want to keep your car on the road buy a clapped out turbo to be highflowed)then it will look stock and be easy to fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...