Jump to content
SAU Community

Recommended Posts

FMIC are an odd one. Most people cut the front bar to fit the pipes. This makes them a nono. If yours is properly fitted with no hacking etc it should be fine.

That's right Sin, if you have changed/modified your chassis to fit a fmic it is defectable but if it fits correctly it is allowed hence the time role have passed through Dickson with fmic. However it the car had a top mount intercooler like WRX's you cannot have a fmic without engineering because your average skyline, Silvia etc has a forward facing intercooler outside the chassis frame oem. Same goes for turbo lasers where they are next to the engine.

I agree and disagree. Cutting the reo bar i agree with being a big no no but when i did it on my old r33 i took the car to a panel beater and ask if there was any issues with cutting a hole in the part near the wheel well and above the chassis to put the pipe through and got confirmation that part of the vehicle if cut will not change the integrity of the strength of the vehicle.

Any one else done the same?

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Dont rely on mechanics to get it right, read your adr's.

The adr's on your compliance plate are the ones you have to comply with.

Hole for pipe needs i think...

3mm reo plate, welded on 100-150 mm all sides from hole.

Something like that, cant remember details.

Not all rules make sense for specific purposes, some are there for general principals.

The hole in that spot on that car may not make the car any weaker, BUT, they want it done anyway cos they cant be that specific in the rules.

Dont rely on mechanics to get it right, read your adr's.

The adr's on your compliance plate are the ones you have to comply with.

Hole for pipe needs i think...

3mm reo plate, welded on 100-150 mm all sides from hole.

Something like that, cant remember details.

Not all rules make sense for specific purposes, some are there for general principals.

The hole in that spot on that car may not make the car any weaker, BUT, they want it done anyway cos they cant be that specific in the rules.

I've heard that since I did it. The car hasnt changed and still passes roadworthys.

I think they need to set the rules so that everything is the same.

Somethings are illegal on one vehicle and on another vehicle its legal.

Something to help people with the silly defects given to some modified cars on the side of the road. Namely Noise Tests on the side of the road.... Print this off and ensure that the officer at the time of the test follows the guidelines set out by the National Transport Commission of Australia. Note that this document specifically mentions the allowed equipment for noise tests angles and distances rpm for types of cars etc

http://www.ntc.gov.au/filemedia/Reports/NatStatExhaustNoiseTestSept2006.pdf

I will be adding up more soon but just advising that they are doing the same blitz through Westfield Woden at the moment and have confirmed with Westfield management that they are no allowed to be there unless invited by Westfield

I will be adding up more soon but just advising that they are doing the same blitz through Westfield Woden at the moment and have confirmed with Westfield management that they are no allowed to be there unless invited by Westfield

Did management confirm they HAD invited them? Your post is a little vague there :P

How about a $40 car cover?

They cant see sht then, they cant see rego or number plate.

Just cover your defects and rego when parking.

And some kind of alarm so they cant f&@k with it.

Or tiny locks so it cant be moved without breaking something, and if they do that....... well, you can imagine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...