donut_kng Posted May 13, 2013 Share Posted May 13, 2013 Howdy, Up for sale the following bits purchased with project car which are no longer required most bits are new and never used unless specified. I have many R32 and R33 bits available so please PM if its not advertised! 6 x Nismo 600cc injectors (used) mounted in standard R33 RB25 rail and including stock fuel pressure reg. Straight bolt in for RB25 $600 + post YELLOW JACKETS coil pack set R33 Series 2 (no ignitor box) - YJ-RB2526-S2 Straight bolt in for RB25 NEW never used - they have been fitted but never fired up. pic is not of actual coilpacks as I didn't get a photo of the actual ones $350 + post 6 boost genuine steampipe exhaust manifold to suit RB25 (manifold was built to suit RB25 in R32 - compact design - but will be prefect for any R32 or R33 or RB25) Work of art to Suit RBb25 head stud pattern T3 flange 50mm v-band external wastegate flange NEW never used $1100 plus post these RRP $1400 http://www.horsepowerinabox.com/HPIAB2/prod36.htm Kando Dynamics KINUGAWA turbo kit T67-25g 10cm (similar specs to a Garrett 3540) T3 rear and V-band dump 0.63 very responsive on rb20 or 25 Compressor housing: AR70 2.5 inch outlet Surge slotted front cover for that awesome whistle sound NEW never used Results speak for themselves- good for 15psi at 4000rpm and 300+rwkw with supporting mods on a stock RB25 http://www.skylinesaustralia.com/forums/topic/347726-kando-dynamics-turbo/ Comes with all braided lines, t3 stainless gasket, and 90 silicon elbow off turbo. - save the stuffing around as this one is ready to go. $700 plus post RRP$850 Turbo Beanie Keep the heat where it should be - suit T25-T3 small T4 NEW never used $60 plus post Front mount intercooler 600x300x76 Perfect for the front of any skyline Finished in black in great condition looks like new, has been used. $100 + post R32 GTST Gearbox and tailshaft combo Has redline oil, taken out of vehicle with 145xxxkms on clock $500 pickup only will throw in heavy duty clutch for extra $100 R33 series 2 RB25DET engine Came with project car approximately 110xxxkms Complete long motor comes with alternator and power steer pump Ready to drop in just add your bolt ons or purchase mine! NEW exhaust studs fitted as this was to be used with the above. $900 pickup only can negotiate more inclusions Monster K&N filter RE-0860 4"x12" cone filter NEW never used comes in original box $40 plus post RB25 R33 Silicon radiator hoses Top and bottom hose NEW never used $20 + post 16inch chaser wheels set of 4 16 x 6.5, 5x114.3 stud pattern 36 offset Camber wear on tyres great drag tyres sit tough on all skylines $150 RB25 R33 engine mounts Used good condition $80 pair + post RB25 R33 starter motor Used good condition $40 + post Exhaust heat wrap roll NEW never used $50 for the roll enough to do manifold and dump pipe. I also have a range of R33 and R32 bits so PM me if you need anything. Will post more items soon. Located in Sydney Hills Area prefer pickup will post at buyers expense, all prices negotiable although please no time wasters. Link to comment https://www.sau.com.au/forums/topic/425171-fs-rb25-r33-r32-300kw-performance-parts-turbo-kit-rb25-engine-gearbox-intercooler-heat-wrap-manifold-injectors/ Share on other sites More sharing options...
daniel_r33drift Posted May 13, 2013 Share Posted May 13, 2013 Hey mate are the injectors complete with all the bits to bolt straight in? And have they been flow tested? I'm pretty interested! Link to comment https://www.sau.com.au/forums/topic/425171-fs-rb25-r33-r32-300kw-performance-parts-turbo-kit-rb25-engine-gearbox-intercooler-heat-wrap-manifold-injectors/#findComment-6849380 Share on other sites More sharing options...
donut_kng Posted May 13, 2013 Author Share Posted May 13, 2013 Hey mate are the injectors complete with all the bits to bolt straight in? And have they been flow tested? I'm pretty interested! PM sent - yes they are drop in ! have not been tested, Link to comment https://www.sau.com.au/forums/topic/425171-fs-rb25-r33-r32-300kw-performance-parts-turbo-kit-rb25-engine-gearbox-intercooler-heat-wrap-manifold-injectors/#findComment-6849402 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now