Jump to content
SAU Community

Recommended Posts

the top pippig im really wanting to replace coz as you may see when they put it on it started hitting the bonnet, so i had my mechanic try and lower it as much as he could coz it was rubbing pretty bad

Yep but you will find that is a bigger job than you think as you will need a different intercooler setup etc

yea im just concerned that if it rubs a hole in it im kinda dead in the water

Pack race tape :P Lol, no really you should have the pipe modified to stop the rubbing! Plenty of other cars running that style piping without issues :yes:

yea its lowered now and isnt touching as far as i can tell but if you look at it in real life the way they placed stuff and the cheap rubber piping seems weird. btw a quick qestion with the stock turbos should they constsit with its boost or should it patter out around a certain rmp then kick in again ? or should i have that looked at? lol

first turbo so im still figuring out how it should ride and what it should feel like with the mods he put on it.

i dont know the boost or horsepower yet for sure, need to wait a month to get the cash together to put it on the dyno and have it serviced. but from what the guy i got it from he said it was 187kws and boosted to 14 psi and after a fortnight of driving it i very much doubt that is real.

yea im taking it to millennium motorsports and putting it on the dyno there and he said he would make sure its boosted safely and rework the boost for different gears so i dont get 14 psi on first gear etc. so im hoping that will fix her. apart from that shes a great car even has the factory sunroof =). clean inside just need to remove that pink crap from the skyline on the back and pull off the gtr badge.

yea im taking it to millennium motorsports and putting it on the dyno there and he said he would make sure its boosted safely and rework the boost for different gears so i dont get 14 psi on first gear etc. so im hoping that will fix her. apart from that shes a great car even has the factory sunroof =). clean inside just need to remove that pink crap from the skyline on the back and pull off the gtr badge.

Lol well report back with how it all goes mate!

Gotta go, talk later!

Fix the weak spot. turns out the turbo smart machanic boost controller was stuffed and pissing out pressure, running like a dream now all thanks to cyifly from these forums meeting up and having a look at her for me. awsome guy and god damn his car is a BEAST! lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...