Jump to content
SAU Community

Recommended Posts

Hey guys,
I need to sell some parts, I've changed cars so need to sell everything that isn't relevant to an S14!

I have an R33 S2 which I'm wrecking, there are a few bits left and I'll update with those in a few weeks.

1. Weds Wheels (Guild maybe?) These are 16x8 +30 front and 17x9 +36 rear. Double staggered setup from factory, forged single piece wheel. PCD is 4x114.3 and 5x114.3. The wheels are in exceptional condition, zero buckles or dings, there was a small amount of gutter rash which has been repaired (please see pictures).

I'm happy to sell these in pairs as I expect some people won't want to run the double stagger. $400 for this pair or $700 for the set!


The 17x9 have 225/45r17 Federal RS (model before RSR) with about 80% tread, 5.5mm in the centre, even wear on both tyres (been on the rear of my live axle R31 for daily duties) $350 for this pair or $700 for the set!

P1010717.jpg

P1010722.jpg

P1010723.jpg

P1010731.jpg

P1010739.jpg

P1010741.jpg

P1010742.jpg

The 16x8 have 225/45r16 Yokohama Advan Neova AD07 (again, 1 model old) with a small amount of tread left, at a guess 3.5mm and even wear. I will get some proper pictures of this pair later this week.

2012-01-20163229.jpg

Sparco NS2 Rally wheels. 16x8 +36 rear 16x7 +32 front. Forged 2 piece wheel. 4x114.3 PCD. Also in good condition, no buckles or dings, small amount of gutter rash which has been repaired (please see pictures). The wheels have 225/50r16 tyres but they are bald, I can remove these for postage at $20 cost. $350 for this set. (more pictures to come later)

P1010616.jpg

Kenwood DDX6039 headunit. This is installed in the new car I just bought, but I need to sell this to fund new lifters. It's in very good condition, no worn or broken buttons, screen is nice and clean. Full list of specifications available:
Seems to be a good quality unit, motorised face with tilt, beautiful 7" LCD screen, plays DVD/CD/MP3 etc, has 3xpairs RCA preout so can run front/rear/sub, has dual zone volume control so you can listen to music in the front and a movie in the back, or something... Also has the capability for a navigation add on. Comes with remote and wiring harness. $450 for this.

P1010764.jpg

Apexi PowerFC and Hand Controller, removed from a running S2 R33 GTS-T RB25DET manual. The ECU is in good condition, there are a few marks on the surface (please see pictures). The hand controller is in exceptional condition, I haven't seen one this clean before. The hand controller was tucked under the kick panel with the ECU, so I don't think it saw much use/playing around. $900 for the PowerFC + controller.

P1010761.jpg

P1010759.jpg

P1010757.jpg

P1010756.jpg

P1010751.jpg

RB20DET/RB30 5 speed manual gearbox. Removed from a working car and hasn't been used since, previously had Redline Lightweight Shockproof oil in it. Comes complete with speed sender, release bearing, clutch fork etc but no shifter (I have a short shifter which will be for sale shortly). The input shaft is in great condition too. I bought this as a spare for my R31 but never ended up needing it. $400 for the gearbox.

P1010769.jpg

P1010771.jpg

I'm more than happy to post any parts, please send me a message with your postcode for a quote. There will be more stuff updated shortly, R33 S2 parts (suspension, brakes, diff, hubs etc) and I will more than likely be wrecking my R31 next month too (rebuilt differential, tailshaft, rb20det gearbox, custom made clutch, exhaust, s13 suspension conversion, coilovers etc). I would trade for S14 manual conversion parts.

Thanks!

  • 2 weeks later...

Engine is sold sorry.

Sparco wheels sold, Power FC sold.
If anyone is interested, please make an offer on anything!

R33 manual flywheel - needs machining $50

RB30/RB20 manual short shifter with broken bushing. I don't know much about this, it came with a gearbox I bought. $40

2013-06-13201305.jpg

2013-06-13201324.jpg

Set of Sparco NS2 Python wheels to come, 17x9 +38 and 17x8 +32 to come, 4/5x114.3, the newer concave style wheels. They are being refurbished at the moment, will be for sale in roughly 2 weeks

2013-04-08183923.jpg

2013-04-10164953.jpg

Thanks

how much for the "Sparco NS2 Python" if you were to stop the refurbing process?

They're already at the painters unfortunately, they might be able to be stopped at primer but I'm not sure where it's all up to.

I'll send you a PM and we can chat.

Cheers.

  • 2 weeks later...

Adding more parts

Part: 4x114.3 wheel spacers 20mm hubcentric

Condition: Great! No problems at all.

Description: This set of 4 wheel spacers was installed on my R31, removed when I sold it. They are in great condition, come with countersunk nuts. They are hubcentric on R31/S13 etc. $70 pair or $120 for set of 4

P1010801.jpg

P1010804.jpg

Part: S13 to R31 rear top hat adapters + rear coilover mounts / sleeves

Condition: Fantastic condition

Description: I had these made at a local machine shop. These bolt to your s13 rear coilover and allow you to bolt it into your r31 without redrilling the strut tower. The centres are countersunk which allows HSD HR coilovers (and other brand with a raised centre) to fit, come with nyloc nuts. Very well made, proper pressed studs etc. $180

The rear legs are from my S13 HSD HR coilovers, the bottom mount has been ground down so it fits the R31 diff. The thread is 55mm in diameter, it will suit HSD HR and I'd imagine others too. $60 for these (Cost $130 pair)

P1010803.jpg

P1010803.jpg

P1010842.jpg

P1010843.jpg

Part: 7kg/mm coilover springs 180mm / 80mm OD

Condition: Great, don't look like they've been used much

Description: I've had these hanging around for a while, they fit HSD HR, BC racing etc, any coilover with the above dimensions. $60

P1010800.jpg

Part: R31 rear sway bar with D links

Condition: Good condition, bushes are in good condition too

Description: I bought this with the intention of doing the dual rear sway bar mod on my car (car is now sold) i think I have the bolts for it too somewhere. $30

P1010796.jpg

Part: R31 rear spoiler with brake light

Condition: Paint is average, average condition overall

Description: This came on my R31 when I bought it, has an LED brake light which worked when it was removed. $10 or free with anything else

P1010798.jpg

P1010797.jpg

Part: R31 / S13 steering wheel boss kit (no steering wheel)

Condition: Good condition, had no problems at all, comes with high tensile bolts

Description: As above! $40

P1010805.jpg

P1010806.jpg

P1010807.jpg

Part: R33 bits

Condition: All good condition, removed from working S2 RB25DET R33

Description: Intake pipes - $50

Standard coilpacks $150

Alternator $70

Coilpack cover and timing cover $80 for both

Standard exhaust manifold $50

Standard dump pipe x2 $30ea

P1010820.jpg

P1010809.jpg

P1010808.jpg

P1010816.jpg

P1010815.jpg

P1010817.jpg

P1010818.jpg

P1010819.jpg

P1010814.jpg

P1010813.jpg

P1010811.jpg

P1010812.jpg

P1010810.jpg


Part: S3 front end parts, been in a small accident


Condition: Front bar is straight with a crack on one corner, some flex has caused the paint to crack. Filler panel has been repaired although requires more work.


Description: As above - $40 for front bar, filler panel free with any other purchase or $10

Washer bottle $10

Window weather shield $20 with original mounting hardware


P1010821.jpg

P1010822.jpg

P1010823.jpg

P1010824.jpg

P1010825.jpg

P1010827.jpg

P1010829.jpg

P1010830.jpg



Thanks guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...