Jump to content
SAU Community

Swap: Carbon 32 Gtr Hood For Standard Gtr Hood (Karbonetic Carbon Fiber )

danbevsta
 Share

Recommended Posts

danbevsta Contributor

danbevsta

Posted
Posted

Hey Guys,

Interested in swapping my Karbonetic Carbon Fiber bonnet for a standard R32 GTR bonnet.

Only defect on the bonnet is a 4cm light scratch. Other then that it's immaculate.

https://www.justjap.com/store/product.php?productid=19919&cat=&page=1

xWe5kSI.jpg

PM me for more info.

Would prefer to swap for a white hood, but can probably work something out if its a different colour.

Located Sydney NSW.

GTRPSI Mentor

GTRPSI

Posted
Posted (edited)

We have a immaculate black one that was just sprayed when we resprayed the car and perfectly straight, panel work was done by Craig at 2die4 body works, not a mark on the surface.

At least you know you wont need to high fill and worry about ripples, this things perfectly straight.

Underside was not resprayed as we were intending to cut the bonnet, your bonnet would work our way so we dont need to do cutting,

Edited by GTRPSI
  • 2 weeks later...
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...