Jump to content
SAU Community

Recommended Posts

Got a few turbos lying around, need to move them.

Will include below parts with each one of them. Making them a real bang for the buck for garage build. PM me if have any questions.

Delivery: 7-10 days by EMS

With every turbo I will include 1x -4AN Oil Feed and -10AN Oil return kit + 1x 3-inch V-band kit
turbo-oil-feed-return-drain-line-completUD_Clamp_3INCH_3_zps4afb8424.jpg

Borg Warner

Borg Warner S362 T4 TS .98AR Compressor Size: 7 blade 62mm/83mm Turbine size: 75mm/68mm Compressor flow: 69lbs/min
mmexport1355296579579_zps5a10d065.jpgmmexport1355296535451_zpse49fea67.jpgmmexport1355296573158_zps24e1fa57.jpg

Genuine brand new in box

Journal bearing (not ball bearing!) More reliable and rebuildable. Barely noticeable spool difference when wideopen throttle compared to bb.

Oil cooled centre core with 360degree thrust bearing

Price: AUD760 Delivered to your door with AN Fitting Oil Feed/Return kit and 3-inch V-band kit included

Pay via paypal

PM me for details

Open to reasonable offers

HOLSET

Holset HX30 Singlescroll T3 9cm(.62AR) Compressor Size: 49mm/73mm Turbine size: 65mm/52mm Compressor flow: 0.35kg/s or 46.2lbs/min

Great for RB20/RB25

(if want special 10cm twinscroll T3 housing add extra AUD125(new))

29112011393_zps3d073b73.jpg17122011402_zpse9b0c186.jpg29112011395_zps42161717.jpg

Holset HE351 (HX35/40 hybrid) 650hp+ beast T3 TS 12cm(.78AR) Twinscroll T3 External gate housing 12cm (.78AR) 60mm inducer 86mm exducer 7 blade Holset Super HX40 Compressor flow: ~69lbs/min HX35/HE351 Turbine size: 70mm/60mm

(If you want other turbine housing like T3 10cm TS Internal Gate, T3 12 cm external gate, T3 14cm TS Internal gate, I can get one for extra AUD125 (new))

If you want to see the amazing potential of a HX40 compressor wheel with a smaller than usual turbine housing on it, take a look at this car- Almost 700bhp AT THE WHEELS from a 2ltr Mitsubishi 4G63 (Evo) engine http://www.dsmtuners...2whp-573tq.html

17122011403_zpsf8a960b7.jpg17122011404_zpsc16f77df.jpgP4110831_zps2e465768.jpg

Genuine brand new in box

Journal bearing (not ball bearing!) More reliable and rebuildable. Barely noticeable spool difference when wideopen throttle compared to bb.

Oil cooled centre core with 360degree thrust bearing

Price: AUD760 (HX30 for AUD735) Delivered to your door with AN Fitting Oil Feed/Return kit and 3-inch V-band kit included

Pay via paypal or wu

PM me for details

Open to reasonable offers

Compressor Cast v-band elbows 2.5inch inlet/3inch outlet

12voutletelbow_zpsa9772631.png6d5d0cdf_zps16ec982f.jpg

Price: AUD35/PCS (Only applicable with turbocarger purchase)

RB special turbo stainless steel manifolds

- Custom made

Turbo inlet flange: T2/T3/T4/T6 Trust/Mitsu 3bolt flange and others
SUS304 stainless steel
3mm pipe thickness
38/42mm runner internal diameter
winscroll or singlesrcoll, single or twin gate configuration
3mm thick flanges, guranteed to not warp and leak

Many Top Asian drifters run those manifolds. With great results and second to none reliability

22412_10152249206820304_549152769_n_zps1Photo016_zps4260efdd.jpg919318_10200324556730189_282945617_o_zps459869_10200324558130224_1435364916_o_zp

Price: RB20/25/26/AUD990 delivered to your door by EMS

Pay via paypal or wu
PM me for special offer on combo
Open to reasonable offers

Edited by robots

With the holsets what are the bottom 2 holsets? You have the hx35 the hx35/40/he351. Then another two displayed? What would the he351 spool like on a built and cammed rb25? Or would the borgwarner be the go? Would full boost be in before 4500rpm?

Answered via PM. Bottom two are just two HE351s with cast elbows and 12cm non-gated housing. Turbo is HE351 which is basicallly HX35/40 hybrid from factory.

Edited by robots
  • Like 1
  • 2 weeks later...
  • 2 months later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...