Jump to content
SAU Community

Recommended Posts

yeah the n1 model works 100% with the s13 ECU. As long as you have the consut plug still on the loom you can simply plug it in and start playing.

Otherwise, if the plug isn't there, i can make one for you without the proper Consult connector (but a standard 5 pin plug) and some extra wire so you can tap it into the ECU wiring yourself.

Let me know how you prefer it.

Impakt

  • Replies 269
  • Created
  • Last Reply

Top Posters In This Topic

getting very interested and will most definetly purcahse one soon.

but, a couple of questions first.

have u found out if the blue backlit screen is feasible? and the total cost?

also, you have said there are provisions for 7 analogue inputs, what about the standard boost guage on the R33 gts-t. would it be possible to use it as an input?

Thx again,

Bill

Yep , got it two days ago. absolutely awesome mate. love it. have already run it through mine and me mates car and trying to figure out how to mount the bastard :)

  • 3 weeks later...

Are you sure that you wouldn't be able to make this unit display / clear fault codes?

I have a laptop and can do it via Conzult / Datascan, but I don't always have a laptop with me. Would be much easier via this wonderful unit...

yeah i can add the feature to view and clear fault codes, but i wont invest the time to do it unless the demand was there.

I'll add you to the (new) list of ppl who wuold buy one if this feature existed :D

yeah i can add the feature to view and clear fault codes, but i wont invest the time to do it unless the demand was there.

I'll add you to the (new) list of ppl who wuold buy one if this feature existed :)

Thanks!

  • 1 month later...
  • 4 weeks later...

Update: I'm currently working on a Subaru (OBD-I) equivalent, and in the meantime thought i would add a fault code read/clear function to the Nissan one!

Price will still be the same and existing displays can be upgraded.

PM me if you're interested!!

Impakt

  • 2 months later...

Hi Impakt,

i bought one of these off you aaaages ago (like, a year and a half ;)) i was wondering if there are any software upgrades or anything like that that have changed over the years of you making them, or are they still the same as when you started?

Mate would you believe they are still the same? A bug is yet to be found ;)

I mentioned adding features to see if it would get demand going again but it didn't so for now any upgrades are on hold.

Lately i have been spending my spare time getting the SubDataScan going..

Impakt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...