Jump to content
SAU Community

Recommended Posts

Selling off lots of parts as building up a new engine and car out of my gtr32

Garrett 2860 -10's with standard dump pipes I believe they are, one is damaged at last track day, looks like it needs a new core, exhaust compressor housing but haven't pulled it apart. $900

Splitfire coil pack hardly used but had it for some time. 300

Gtr32 cold air intake polished kit with apexi pods, 300

White line sway bar. 100

Factory g sensor. 250

Power steering pump and reservoir 100

Oil catch can and breather kit, 300

Apexi turbo timer 40

Hks blow off valves, told they are sqv, need a clean though. 270

Tomei cams A2691N stamped, told they are 260 9.1 lift. 500

Standard plenum with throttle bodies. 250

Ignition coil pack 100

Driftworks solid conversion bushes- s13/r32 to s14/r33/r34, these are brand new in box direct from uk unused, paid over 200 to get em, 100

Abs unit also for sale but not sure on price yet.

Feel free to email me or private message. [email protected] same parts are negotiable but first in will sell as I have placed them else where for sale too

post-19978-0-77483900-1370650608_thumb.jpg

post-19978-0-08800900-1370650639_thumb.jpg

post-19978-0-16665500-1370650667_thumb.jpg

post-19978-0-76875800-1370650692_thumb.jpg

post-19978-0-37313200-1370650720_thumb.jpg

post-19978-0-92239200-1370650939_thumb.jpg

post-19978-0-86762700-1370651012_thumb.jpg

post-19978-0-52633100-1370651044_thumb.jpg

post-19978-0-37589600-1370651253_thumb.jpg

post-19978-0-43644400-1370651305_thumb.jpg

post-19978-0-50097800-1370651553_thumb.jpg

post-19978-0-68505100-1370653102_thumb.jpg

Edited by stevena
  • Like 1

Will drop the turbos to 800

And hks blow off valves to 200,trying to price things to sell quickly and open for offers if they seem to much.

If purchasing pick up is from Melbourne 9-5 business hours availability, or I can send items anywhere at your cost. These parts were off my old engine and set up and aren't being used with the new set up. All parts are in working order and good condition unless specified like the turbo for example, thought that might help as I'm getting many emails asking.

Cheers guys.

Edited by stevena

price drop turbos now 500

Gtr32 cold air intake polished kit with apexi pods, 200

White line sway bar 50

Factory g sensor. 180

Power steering pump and reservoir 80

Oil catch can and breather kit, 200

Apexi turbo timer 20

Hks blow off valves, told they are sqv, need a clean though. 200

Tomei cams A2691N stamped, told they are 260 9.15 lift. 500

Standard plenum with throttle bodies. 200

Both turbos damaged? How many kms on them? Street or track use? How much psi has been through them?

Both turbos damaged? How many kms on them? Street or track use? How much psi has been through them?

Only one damaged, needs to be pulled apart to know exactly what is the issue. Other turbo is working fine. Only reason for not fixing it up and putting it back on car is we have gone to a single conversion set up. Only track use, bout 20 track days in total at 21 pound max boost, last track day when it blew was 26 pound for 2 laps.

Price drop, even open to offers so pm if your interested but don't think the price is right, as i don't like things sitting around and cash can go back into the new build.

Gtr cold air intake polished inlet with apexi pods 160

Oil catch cans and breather kit. 150

Standard plenum with throttle bodies 150

Power steering pump with reservoir 50

Turbos 470, one turbo is in perfect running order, the other looks like it needs a new core, exhaust and housing compressor.

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...