Jump to content
SAU Community

Recommended Posts

Guest INASNT

I am gauging interest in the sale of my car.

I really dont want to sell it but if i get the right price it will go.

White 1996 Series 2 R33 GTS-T

88,000 KM On Clock

2.5 Liter Twin Cam Inline 6 Cylinder Rwd

Twin Airbags and full electrics

Prestige Car Alarm

Engine / Performance Parts

Garrett 3040 600HP Twin Ball Bearing Turbo

(0.70 A/R Polished Compressor Housing, 0.82 A/R Exhaust Housing)

Braided Oil / Water Lines To / From Turbo

XTR Exhaust Housing Blanket

45mm Turbosmart External Wastegate With 1 Bar Spring

Custom Made Steam Pipe High Mount Turbo Manifold

K/N Pod Filter With 3-Inch Polished 304 S/S Intake Pipe

R33 GTR Stealth Bov’s

6 x Sard 550cc Side Feed Injectors

Bosch 044 600HP Intank Fuel Pump

Z32 80mm Air Flow Meter

9 Puck Single Plate Cushioned Ceramic Xtreme Clutch With 1800lbs Pressure Plate

4.8 kg Chrome Molly Super Light Weight Flywheel

HKS Adjustable Exhaust Cam Gear

HKS 600x300x76 Tube And Fine Intercooler

Custom Made 304 S/S 2.5 Inch Mandrel Bent Intercooler Piping

Cusco Oil / Air Separator

Custom Made 3 Inch Heat Insulated Mandrel Bent Dump Pipe And External Wastegate Adapter

Custom Made 3 Inch Mandrel Bent Exhaust From Dump Pipe Back

Highflow 3 Inch Cat and Polished 3 inch Rear Magnaflow Muffler With 4inch Tip

HKS Ionized Oil Cap

Suspension

Blistein Shocks And Springs

Rear Skyline Stabilizer Bar

Pineapple Suspension Castors

Electronics

HKS EVC 3 Electronic Boost Controller

Apexi Power FC Programmable ECU

Apexi Power FC Hand Controller

Pivot Adjustable Shift Light

Blitz Turbo Timer

Apexi 60mm EL Boost Gauge On Trust A Pillar Gauge Holder

Interior

Custom Painted Electric Blue Interior Highlights

Jetspeed EL White Faced Display Dash Kit

Trust Chrome Gear Knob

Alpine 3 Disk In Dash CD Player

Kenwood Front Splits

Kenwood 2 Channel 50 RMS x 2 Amplifier

Original Skyline Floor Mats

Custom Made Leather Electric Blue Handbrake & Gear Boots

Exterior

Nismo 400R Front Bar With Grill Insert

Nismo 400R Side Skirts

Nismo 400R Read Bar

Stealth Rear Boot Lip

Custom Made Headlight Eyelids

17-Inch OZ Racing Rims, 7 Inch Front, 8 Inch Back

235 x 40 Front, 255 x 40 Back Nankang Tyres (75% Thread Left)

Clear Side Indicators

Tinted 30% Front And Sides, 20% Back Window

Performance

1 Bar Boost – 260kw@wheels (Racepace Dyno)

1.4 Bar Boost – 312kw@wheels (04’ Autosalon Dyno Comp)

¼ Mile – Not tested as yet

All Mechanical / Electrical work carried out by Ice Performance

Turbo is just getting into its efficiency zone, so with some internal engine work and a bit more fuel the turbo and rest of the system could pull over 350kw@wheels.

Engine bay body have just been detailed.

I have spent over $20,000 on this from when i bought it, it was 100% stock.

Looking for price around $37,000

Pictures from 04 Melbourne Autosalon

user posted image

user posted image

user posted image

user posted image

user posted image

user posted image

Link to comment
https://www.sau.com.au/forums/topic/42691-300rwkw-r33-gts-t/
Share on other sites

Explain to me exactly why you are selling this weapon again, I mean you said u had not yet ran it down the 1/4 mile yet, dont you want to know what it can do or for that matter take the ride of your life and see where all that hard earned cash has gone too???

Link to comment
https://www.sau.com.au/forums/topic/42691-300rwkw-r33-gts-t/#findComment-876935
Share on other sites

Guest INASNT
Explain to me exactly why you are selling this weapon again, I mean you said u had not yet ran it down the 1/4 mile yet, dont you want to know what it can do or for that matter take the ride of your life and see where all that hard earned cash has gone too???

Firstly coz i wont have a license for atleast 6 months very soon and secondly cause i only get to drive it 1 day a week (sunday)and i have also been eyeing out a M3.

I will hopefully run it down the 1/4 soon before (if) it sells when i get some spare time.

Link to comment
https://www.sau.com.au/forums/topic/42691-300rwkw-r33-gts-t/#findComment-877785
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...