Jump to content
SAU Community

Recommended Posts

left overy bits and pieces for sale from r32 builds.

Need $$ to finish my current drift build.

rb25det standard manifold (top & bottom)

$50

rb25det standard cross over pipe with blowoff valve

$20

rb25det aircon pump and bracket

$70

rb25det aircon assembly, including condensor, aircon radiator and piping

$50

rb25det flywheel needs machining

$25

r2000 diff out of r32 suit rebuild. shells in good condition, internals decided to let go in 3rd gear (not fun) $100

2.5L surge tank with machined holding plate and pump bracket. looks mint and is nice and tidy.

I never installed it i brought it off someone from SAU last year $150

rb25det standard injectors (high flowed)

$120

rb25det standard valve springs (used)

$50

rb25det standard fuel rail

$50

rb25det gearbox mount

$60

r32 gtst break discs F&R

(used condition)

$40

r32 gtst bonnet needs some bog and a respray from minor rear end love tap in traffic (oops)

$60

r32 black eclectric mirrors (L&R)

$40 ea or $60 for both

r32 gtst rear seats

$80

r32 centre surround w/ash tray

$50

r32 head lining w/sunroof

$60

r32 a,b and c piller interior covers

$60

r32 rear interior plastics

$30 ea $50 both

all the interior is in good condition

all prices are ono..

please msg me if your interested in photos

im located in Melbournes S.E suburbs, prefer local pick up

cheers James

Edited by R32-2840
Link to comment
https://www.sau.com.au/forums/topic/427288-fs-r32-rb25det-parts-vic-se/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...