Jump to content
SAU Community

R33 Gtst Front Caliper Missing Parts

Saroon
 Share

Recommended Posts

Saroon Contributor

Saroon

Posted
Posted

I am almost ready to put my new rotors, calipers an brake lines on my 32.

I had my 33 front calipers professionally rebuilt an painted my the car was in at the workshop last year (they aren't on the car yet). I pulled them out of storage on the weekend and found certain parts of it missing!

The bolts that go across the opening on top, where you'd see the pads come into contact with the rotors, are missing on both calipers. As well as the lil spring steel plate/shim that goes there too.

What I was wondering was, is there any other parts in that top area besides the pads, bolts an shim?

Would my 32 type m caliper donate it's ones or is it not compatible?

The workshop also lost the bolts for my radiator panel -__- their work is really good but I'm still not impressed

Any advice or help will be appreciated :-)

Saroon Contributor

Saroon

Posted
  • Author
Posted

The workshop lost them, but I have to shoulder some of the responsibility too, since I failed to check if they were in the box the calipers were returned to me in.

I only noticed last night and was hoping that it maybe a common knowledge thing, cause I have to fight to get the skyline into the garage to work on it lol. One garage space, four cars, four opinions on who gets the garage.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

The workshop lost them, but I have to shoulder some of the responsibility too, since I failed to check if they were in the box the calipers were returned to me in.

I only noticed last night and was hoping that it maybe a common knowledge thing, cause I have to fight to get the skyline into the garage to work on it lol. One garage space, four cars, four opinions on who gets the garage.

Yeah I know the feeling, I lost the centre caps to my wheels, forgot about them at the tyre shop.

Hmm, you can always crash into their cars then say "should have let me fix the brakes before when I wanted to" :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      f**king around with the bro
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Ludenham   44.2 tops day no issues  
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      Then today, I went to visit a man with an r33 hat Peter and Road and Race sorted the alignment. As it is being set up for general track/hillclimbs etc it has a heap of caster (7o), less camber than I am used to (1o front and 2o rear, as the caster looks after that in turns without the braking downsides), 3mm front toe out and 0 toe rear. Will see how that goes and track tyre wear to see if it does need more camber, but adjsustment is also limited with nismo arms and adjustable bushes at only 1 end. It does have a bent inner tie rod on the driver's side front but as it came up within spec I'll just leave that as is. So, that is getting close to my chapter of this story....could of tidy ups then a shakedown in early October before it finds a new home.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      So, it went to Unigroup for a run in and tune on Friday, everything went (generally) well. In terms of fixes, the engine was good and there were no leaks. It needed plugs (I hadn't checked them because the coil pack cover was on a new engine and I couldn't imagine they weren't new.....but turns out the temporary plugs to just keep it sealed up were in there.....new plugs gapped to 0.8 and it was fine from there. Also, there was a little preload on the clutch slave which caused some slip. I haven't had the box off so I don't know what the clutch looks like; my guess it is brand new and the pedal had not been adjusted....backed that off a bit and it held fine. Last thing will have Dose crying....the idle especially when cold is a bit difficult between the cams, forward plenum, atmo blow off valve and an 80s air management system. It is fine when hot but a little uneven when cold, will see if I can sort or at least improve that one cold morning. Other than that, tuning went fine. It made 245 but was pulled back to 227 which 2 opportunities to improve in future. 1. The factory CAS is not great and was jumping around at high RPM, so Mark took 2 degrees out up top (that is why it stops making power and lost 20kw). Very safe this way and the extra power is available but will require a more modern ECU and better cam (or even better crank) sensor 2. The 2871 in factory housings is very big for a low mount, and the internal wastegate is too small, so it was creeping from mid range all the way to redline....the duty cycle on the boost controller is turned down a little for safety. That is much harder to fix, it would need a large external gate and that would require a whole bunch of other changes, so it will go as it is for now. It feels nice and healthy and safe, so should be good for about a billion laps like this.
    • Duncan
      Slight brake pedal stutter after new pads

      By Duncan · Posted

      what sort of caliper are they? If they are a slider and you gave everything a good clean, you might need to regrease the pins. My guess though is they will come good after some abuse as suggested above
×
×
  • Create New...