Jump to content
SAU Community

Recommended Posts

My r33 gtst has standard shocks and the springs are cut. I am in the process of changing suspension bushes cause they are stuffed and steering is really bad so i am considering doing the lot (springs and shocks). I already have a set of king springs at home i think they are 140mm lower than standard ride from what i gathered... Not sure about compression or anything... What is a good value set of shocks to get? i dont want to spend a fortune but just want to get a set of good quality ones that will keep my car low, and not be 2 bumpy for street use like my chopped springs.

Sorry for the long post any help appreciated...

Link to comment
https://www.sau.com.au/forums/topic/42950-shocks-springs-what-to-get/
Share on other sites

140mm lower than standard are you sure dude that is way low, well actually you would be dragging a fair bit of stuff :uhh:

How much do you want to spend is the question to ask your self, bilsteins are about $900 for the four, not to hard pritty good for street use. You could get KYB's for a bit cheaper don't know what these would be like though, they are about $750 for four.

If you lower it a fair bit you are going to need alot of caster and camber dialed in.

What sort of bushes have you got.

At the moment my camber is stuffed bad. My insides of the tyres wear out before the outside is even started. maybe it was 40 mm lower not 140... Intending on spending approx $1000 not much over that. at the moment the car is like 3" lower than standard so its a pretty rough ride and the M-spec bar sits about 1.5 inches above the ground.

I doubt you'll be able to get a set of springs and shocks for that price. Unless you go for second hand. Just Jap has some second hand suspension at the moment on sale. Check out www.justjap.com but be aware that these are usually coil over packages and may not improve the comfort factor.

Otherwise get a good set of springs that aren't too low. Like a set of low kings and keep the factory shocks until you can afford new shocks. You'll probably find your bumpstops are rooted and need to be replaced as well.

try UAS..

mention SAU member (have you joined yet?) and you will get some discount.

Bilstien -> 225 x 4 = $900

whiteline spring -> $2~300

so should not too far from $1000..after discount

Sorry Boro, I could not get the RSM at this stage, something need to fix first.

I already have a set of king springs as mentioned in 1st post... Im not too fussed about a bumpy ride as most lowered cars are like that. Just when my car bumps it rattles everything inside it and the window's etc. My mates S15 silvia is low but when he hits bumps the it bounces off them smoothly rather than my banging etc... I am not after a standard set up and intend to keep the car low.

Im not too fussed about a bumpy ride as most lowered cars are like that.

But it doesn't have to be that way, you can have a nice ride. :aroused:

Just choose the right components in the first place. It doesn't cost more either. Sidewaymambo posted the right suggestion, Whiteline springs and Bilstein shocks. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...