Jump to content
SAU Community

Recommended Posts

Iv almost finished wrecking my 32 I fist have a few things left

1. R34 gtr brembos

Good condition , painted black originally gold , red ceramic pads which are almost new , front rotors are good the rears are stuffed , 1200 ono pick up preferred from geelong area , these go for a lot more I know but I basically just want enough to finish off a brake upgrade on another car.

2.r32 gtr rear cradle with gkteck solid bushes , cradle is in good condition has been cleaned and painted ,bushes are new and have been fitted to the cradle,80 bucks pickup only geelong area .

3.hicas lock bar suits r32 may suit other cars ,bar itself is in used good condition with new rack ends ,50 bucks , pick up or post at buyers expense.

4.r32 gtr front lower control arms with adjustable castor rods , rods and arms are in good used condition arms have new inner and outer ball joints , 50 bucks ,pickup or post at buyers expense.

5.r32 gtr rack , good used condition , New rack ends ,50 bucks , pickup only

6. Starcorp tracer 2 wheels 18x8 fronts 18x9 rears , rims have some gutter rash ,front tyres are new rear tyres are abit camber worn but still roadworthy , 500 pickup only .

All items gotta go as iv moved and don't have a lot of room , pics on request, you can contact me via pm or sms on 0410035624

The rotors have a big lip on them ,I don't think there in spec anymore , the calipers are still good and pads are almost new

  • 2 weeks later...

.r32 gtr front lower control arms with adjustable castor rods , rods and arms are in good used condition arms have new inner and outer ball joints , 50 bucks ,pickup or post at buyers expense.

were are you located?

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...