Jump to content
SAU Community

Recommended Posts

Hey chaps,

Any of you fellas going to be getting this? If you're a fan of the Elder Scrolls Series, you'll be all over this one.

Basically, a MMORPG with a PvP and PvE engine, with 300 player battles in a world that takes 3 hours to walk from one side to the other. I'll most likely get it on PS4 first, then when mods become available, get it on PC.

From the website;

It is a time of strife and unrest. Armies of revenants and dark spirits manifest in every corner of Tamriel. Winters grow colder and crops fail. Mystics are plagued by nightmares and portents of doom.

Four years ago, in 2E 578, an arcane explosion of energy in the Imperial City set off mystical aftershocks that swept across Nirn. Mages died or went mad. Supernatural abominations from the plane of Oblivion, the Daedra, appeared in greater numbers than ever before. The constellation of the Serpent grew so large that it dominated the night sky.

story-coldharbor.png

So began the grand scheme of Molag Bal, Daedric Prince of domination and enslavement. His Dark Anchors, vortexes of evil magic, weaken the barrier between worlds, threatening to merge Nirn and Oblivion into a single, nightmarish hellscape.

story-monsters.jpg

In the midst of this chaos, three alliances vie for control of the Imperial City and the White-Gold Tower. High Rock, Sentinel, and Orsinium stand as one, united under the rule of the High King in Wayrest. Valenwood and Elsweyr have forged an alliance of their own with Summerset, while Black Marsh, Morrowind, and Skyrim have formed a third, uneasy pact.

The Daggerfall Covenant. The Aldmeri Dominion. The Ebonheart Pact.

Three armies will take up arms against the Empire, and against each other, to wrest control of the Imperial City and White-Gold Tower from the dark forces of Oblivion itself.

You basically fight for one of 3 alliances.

ava-daggerfall.jpg

The Daggerfall Covenant is comprised of the two Provinces of northwest Tamriel: High Rock and Hammerfell, home to the Bretons and the Redguards. The Covenant has also offered the Orcs the opportunity to return to their ancient homeland of Orsinium in exchange for their support. Working together, the three races have formed a powerful alliance that aims to restore the Second Empire and bring peace and prosperity back to Tamriel.
ava-ebonheart.jpg
The Ebonheart Pact is the most tenuous of alliances, consisting of former enemies turned allies in northern and eastern Tamriel. The Nords, Dark Elves, and Argonians of Skyrim, Morrowind, and Black Marsh fight to restore stability to the Empire and ensure their own autonomy.
ava-aldmeri.jpg
The Aldmeri Dominion is composed of the three races of southern Tamriel: the Wood Elves of Valenwood, the Khajiit of Elsweyr and the leaders of the Pact, the High Elves of the Summerset Isles. The Aldmeri Dominion fights to stop the dangerous machinations of humankind, and restore the Elven dominance in Tamriel.
Cheers,
Shaz
Link to comment
https://www.sau.com.au/forums/topic/429934-elder-scrolls-online/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...