Jump to content
SAU Community

Recommended Posts

UP FOR SALE IS MY UNFINISHED SILVER R32 GTR 1994 MODEL NEEDS A ECU AND HEAD GASKET NEEDS ATTENTION, AT THE MOMENT IT IS AT MY MATES WORKSHOP AS I WAS GOING TO REBUILD. ENG AND GEARBOX ARE STILL IN THE CAR ENGINE IS ALSO FITTED WITH TOMEI CAMS AND CAMGEARS, SPITFIRE COILS, INTERCOOLER AND XFORCE Y PIPE EXHAUST THESE PARTS ARE ALL NEW AND ALSO HAS LARGER INJECTORS UNSURE OF SIZE. I ALSO HAVE A REBUILT DUAL BEARING HKS T51R KIT WITH STEAMPIPE MANIFOLD, TIAL WASTEGATE, INTAKE PIPE WITH FILTER AND COOLER PIPING AND A FUEL SETUP TO SUPPORT X2 044 FUEL PUMPS SURGE TANK INLINE FILTER BRAIED LINES FRONT TO BACK AND HKS FUEL RAIL WHICH IS NEW WITH FITTINGS.THIS SALE IS FOR THE CAR ONLY THE HKS TURBO/KIT ALONG WITH THE FUEL SETUP ARE EXTRA.

I CAN SEND A VID OF THE CAR RUNNING BEFORE THE GASKET WENT ALSO BELOW IS A LIST OF MODS I LEFT OUT

  • TOMEI CAMS NEW
  • TOMEI CAM GEARS NEW
  • XFORCE Y PIPE EXHAUST NEW
  • INTERCOOLER NEW
  • CUSTOM AIRBOX MADE BY PROFAB WITHOUT AFM BRACKETS NEW
  • HARD INTERCOOLER PIPING PROFAB NEW
  • CATCH CAN WITH HOSES ALSO MADE BY PROFAB NEW
  • SARD FUEL REG NEW
  • WALBRO INTANK FUEL PUMP
  • NISMO ENG AND BOX MOUNTS NEW
  • LARGER INJECTORS UNSURE ON SIZE
  • MISHIMOTO ALLOY RADIATOR NEW

ANY QUESTIONS OR PICS PLEASE CALL EDDIE ON 0422624468

CAN ALSO ASSIST WITH TRANSPORT IF NEEDED

post-32446-0-17027200-1376472754_thumb.png

post-32446-0-76657900-1376472768_thumb.png

post-32446-0-40474700-1376472780_thumb.png

post-32446-0-91533500-1376472794_thumb.png

post-32446-0-64908100-1376472828_thumb.png

post-32446-0-13452500-1376472839_thumb.jpg

post-32446-0-25763000-1376472909_thumb.png

post-32446-0-51145500-1376472933_thumb.png

post-32446-0-01425700-1376472945_thumb.png

post-32446-0-72369500-1376472957_thumb.png

Link to comment
https://www.sau.com.au/forums/topic/430249-fs-r32-gtr-1994-syd-10000ono/
Share on other sites

What is it actually missing? Does it come with any turbo(s)?

What rims are included?

What suspension does it have?

Whats the interior like?

Have you got any pics of it in its 'for sale' state?

Is it registered?

Edited by too_much_boost

Suspension is standard, comes with standard gtr wheels, no rego. Interior is in very good condition besides the drivers seat. Body wise it needs a grill. Mech wise just missing a ecu at the moment eng and gearbox are ready to be pulled out just sitting on mounts as i was going to rebuild the lot

That's really all you can do to get the money you think it's worth otherwise it's just another 32 Gtr with dead engine if which there has been plenty of lately for some reason anyway glws

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...