Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

its good mate. So pleased to have them all at home.

Back at work today, so can't play much with GTR nor spend time with my little one :(

But need money and so does my boss which is totally understandable.

Fair enough! Hopefully you get to spend some more time with them both soon

Ants, double your C/O rate. :D

although it would increase my salary quite attractively I would never be able to be profitable if that ever happened.

But I know where ur comin from ;)

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

long runner Itbs out the bonnet? Aww yis

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

There is only so many ways to skin a cat, who cares if he has some things the same as yours, its bound to happen.

There is only so many ways to skin a cat, who cares if he has some things the same as yours, its bound to happen.

Yer I know, lots of people end up with similar setups. I dunno a dislike of a human can throw reality out the window mr bunts :)

what is it with qld tuners and not being able to tune a car in a timely fashion.

i want pics and results damnit.

It is being done in a timely fassion, Do you know anyone in NSW that can do all the fabrication work on a new engine fitout in under a day as well as source and fit other required goodies? Our initial expectations and timelines were more optimistic than reallity in relation to this project. Still progress is happening and long weekend is now over.

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

Can he afford it, and can he get it done. If not then what's the problem let the dreamer dream.

Can he afford it, and can he get it done. If not then what's the problem let the dreamer dream.

He can't afford them but he'll get them, he's 22 still lives at home and gets his girlfriends to pay for EVERYTHING.

He just ordered a set of 18x13 -28 work Meisters, cost him something like 4k :O

.... Mayb he sells drugs

He can't afford them but he'll get them, he's 22 still lives at home and gets his girlfriends to pay for EVERYTHING.

He just ordered a set of 18x13 -28 work Meisters, cost him something like 4k :O

.... Mayb he sells drugs

Steal his rim's...sell them buy your gear.

He can't afford them but he'll get them, he's 22 still lives at home and gets his girlfriends to pay for EVERYTHING.

He just ordered a set of 18x13 -28 work Meisters, cost him something like 4k :O

.... Mayb he sells drugs

What car is this in/on?

It is being done in a timely fassion, Do you know anyone in NSW that can do all the fabrication work on a new engine fitout in under a day as well as source and fit other required goodies? Our initial expectations and timelines were more optimistic than reallity in relation to this project. Still progress is happening and long weekend is now over.

i was under the impression the fab work was all done, and just awaiting a tune?

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

Look at it the other way. You can do a better job and show him up/

It is being done in a timely fassion, Do you know anyone in NSW that can do all the fabrication work on a new engine fitout in under a day as well as source and fit other required goodies? Our initial expectations and timelines were more optimistic than reallity in relation to this project. Still progress is happening and long weekend is now over.

Can he afford it, and can he get it done. If not then what's the problem let the dreamer dream.

some people just like to stir shit and make it seem as though there's an issue.

Good things take time.

He can't afford them but he'll get them, he's 22 still lives at home and gets his girlfriends to pay for EVERYTHING.

He just ordered a set of 18x13 -28 work Meisters, cost him something like 4k :O

.... Mayb he sells drugs

lame. Beats my 18x13-6's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...