Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

morning all

Long as day finally home. Put an even 675 kms on yhe gtr this weekend

nice :)

I got away with only using half a tank of e85 which i thought was quite good considering the route us Northies took

thats good, I used a little less than half a tank. but had a few km's less to drive.

morning all

nice :)

thats good, I used a little less than half a tank. but had a few km's less to drive.

Yeah i was quite happy. Considering the new motor etc, thought it would go though a bit of fuel as there was a fair bit of gate and screamer action in the mountains

Did the exact same thing Scott, :rant:

So frustrating. I said to myself Saturday arvo "Make sure you put camera on charge"

Was leaving sunday morning and say the camera mount on my windscreen and thought "f**k" ill just take ti and hope there is charge.

It would have been some great mountain footage

Shame about the cameras, I was so excited when I thought we had the three v8s together for the mountain run then the third purple 34 turned out to be bloody Steve's car instead of Ashs grrr

Hey if any one has a spare ticket for the circuit coffee on Sunday 15th Dec

I will gladly buy it off them, I need one for my Bro.

I heard they are sold out unfortunately. I grabbed one when there was only 10 left

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...