Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Speaking of tax dollars, repeal day was yesterday. What are Mr Ants' thoughts on the matter?

About bloody time!

I welcome these amendments in fact I could almost kiss them.

We live in a really wonderful country that offers incredible opportunities to the ones that are searching for it compared to other well developed countries. HOWEVER, the level of bureaucracy in Australia has been on the rise for quite a number of years and not only is it burdensome to us all but has prohibited Australia to become more competitive as well.

Removal of the so called ‘red tape’ is certainly a welcoming measure and will assist businesses carrying on what they do best and that is concentrating on their business operations.

Australia is simply too highly regulated and having the need to have a watchdog for every sector is simply not viable and canning the watchdog for charities is fine by me especially since the ATO has been already been administering these duties already.

The reduction of compliance requirement within the future of financial advice act (FOFA) is a doubled edge sword though……….I know many financial advisers that do the right thing by their clients and do not even accept commissions and as such would benefit from yesterdays reduced regulation, HOWEVER, it is other gung-ho financial advisers that need such regulations in place to keep them in check. I think that other controls should be put introduced like maybe force each financial advisers (of certain size) to establish a risk committee within their organisation to mitigate any potential abuse or self-interest arising and reports from the committee can then be audited / reviewed by ASIC (just an suggestion I thought of as a middle ground)

This is only scratching the surface, more unnecessary regulations need to be removed at Federal level and especially at State government level; take a look at your local councils for example, you need a form for a form to get another form these days, thus only adding to the frustration of us general household consumers to try and do the right thing i.e. could be getting soil testing done, permits, etc….

Much more to be done but this is a good start.

About bloody time!

I welcome these amendments in fact I could almost kiss them.

We live in a really wonderful country that offers incredible opportunities to the ones that are searching for it compared to other well developed countries. HOWEVER, the level of bureaucracy in Australia has been on the rise for quite a number of years and not only is it burdensome to us all but has prohibited Australia to become more competitive as well.

Removal of the so called ‘red tape’ is certainly a welcoming measure and will assist businesses carrying on what they do best and that is concentrating on their business operations.

Australia is simply too highly regulated and having the need to have a watchdog for every sector is simply not viable and canning the watchdog for charities is fine by me especially since the ATO has been already been administering these duties already.

The reduction of compliance requirement within the future of financial advice act (FOFA) is a doubled edge sword though……….I know many financial advisers that do the right thing by their clients and do not even accept commissions and as such would benefit from yesterdays reduced regulation, HOWEVER, it is other gung-ho financial advisers that need such regulations in place to keep them in check. I think that other controls should be put introduced like maybe force each financial advisers (of certain size) to establish a risk committee within their organisation to mitigate any potential abuse or self-interest arising and reports from the committee can then be audited / reviewed by ASIC (just an suggestion I thought of as a middle ground)

This is only scratching the surface, more unnecessary regulations need to be removed at Federal level and especially at State government level; take a look at your local councils for example, you need a form for a form to get another form these days, thus only adding to the frustration of us general household consumers to try and do the right thing i.e. could be getting soil testing done, permits, etc….

Much more to be done but this is a good start.

There's definitely a lot more that needs to be done but it's a great start. The number of people working in government in antiquated divisions is remarkable...

The filter in the RB, while not difficult, could be a lot easier. Magic Mike wins that round

Ls1 oil filter, directly at the bottom with nothing in the way and you don't end up with oil on your block

I hate spark plugs on any rb with a crossover pipe. Again not difficult but well annoying

Spark plugs on an ls1, open bonnet take of lead unscrew put in new plug put on lead close bonnet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...