Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Nah man, Miami, FL

Remy V is for the US domestic market only, Robin Thicke is the ambassador for the brand....check out blurred lines, but only look for the Remy bottles (if you can)

:O

Maiden voyage with rego to work today. Nice to be driving a zed again. Didn't overheat or anything!

And the carpark guy put im in the handicap spot up the front away from the other muppets :D

inb4handicapjokes

Mike you would have been handy at the Tuned Performance dyno day the other week.

Some guy who just bought a Zed got it up on the dyno and smoke started coming out from behind the dash cluster and the wipers etc were going berko when the accelerator was used. Poor guy was devastated and wasnt sure what was going on. It later left on a flat bed

Yeah been speaking to him. Aparantly the alt reg died and let it pump 18v through the system and fried everything. I have to go through the shed on the weekend and see if I can find some computers for him. Auto, pwr steer, abs etc etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...