Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

So it is fair to say that the Evos are a force to reckon with at sprints?

Can't wait to get some track experience under my belt

Yes, yes they are. At super lap they make up the pointy end of the field every year. It all comes down to the fact that compared to a GTR they are light.

To be fair, the stock suspension setup with coilovers and a wheel alignment is still pretty decent.

Disagree. You can't get the camber required to be decent.

Yes, yes they are. At super lap they make up the pointy end of the field every year. It all comes down to the fact that compared to a GTR they are light.

Disagree. You can't get the camber required to be decent.

good ol power to weight

Need to make the Ant-Eater lighter

Nick and I arrived kinda late in the day but it was good to meet a few of you guys and I had a ball with Mike taking me for a few laps in the passenger sesh at the end of the day, thanks again for that mate. Hopefully once I sort out my lack of a suitable car I'll be able to participate in these events in the near future. So if you guys know of or see any clean s2 r33s for sale let me know :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...