Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

What ecu are you using Pete? Nistune?

How will narrowband O2's help with e85?

Better off removing closed loop IMO and tuning for a targetted afr at cruise ;)

I dunno, there's a measurement of something then magic happens in the ECU and then car runs better?

I guess i need to do research

narrow band sensors have a kind of "S" voltage curve though Pete. So the're only really good at knowing if it is 'too rich' 'too lean' or 'good' based on good being 14.7:1. If good for e85 is a different ratio, they're not going to be very useful.

Edit: Just did some quick research, e85 stoich is closer to 9:1. narrowband o2 sensors going to be quite useless.

lawl. Nistune is more than capable of handling 99% of street car requirements, regardless of the holy gtr or not ;)

can it eflex?.......................yerrrrrrr I didnt think so.

can it eflex?.......................yerrrrrrr I didnt think so.

Well actually... Yes, yes it can ;)

https://www.conceptzperformance.com/Cart/description.php?II=16316

http://forum.nistune.com/viewtopic.php?f=12&t=2874&hilit=flex+fuel

Edited by MagicMikeZ32
That's awesome, now if it could take different trigger inputs and map sensors they would be in business!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...