Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

=SUMPRODUCT(--('Cost Table Info'!$A$2:$A$23000='Cost Tables'!$B$222),--('Cost Table Info'!$C$2:$C$23000='Cost Tables'!$B227)*('Cost Table Info'!$I$2:$I$23000))

That is the stuff I look at all day everyday...

Surprised you don't do similar!

mate I do but in different formats

Where you deal with costings, budgeting etc... I deal with other matters

=IF(E101>180000,(+E101-180000)*0.45+54547,IF(E101>80000,(+E101-80000)*0.37+17547,IF(E101>37000,(+E101-37000)*0.325+3572,IF(E101>6000,(+E101-18200)*0.19,0))))

=IF(E101>17795,+E101*0.015,0)

=-IF(E101>67750,0,IF(E101>30000,(E101-30000)*0.04-1500,-1500))

and my formulas make more sense :P

mate I do but in different formats

Where you deal with costings, budgeting etc... I deal with other matters

=IF(E101>180000,(+E101-180000)*0.45+54547,IF(E101>80000,(+E101-80000)*0.37+17547,IF(E101>37000,(+E101-37000)*0.325+3572,IF(E101>6000,(+E101-18200)*0.19,0))))

=IF(E101>17795,+E101*0.015,0)

=-IF(E101>67750,0,IF(E101>30000,(E101-30000)*0.04-1500,-1500))

and my formulas make more sense :P

The first one is a tax table but looks like the 12/13FY table as the rates are wrong for this year.

Second is FBT?

Third?

Pfft, simple equations :P

But yay, excel worksheet peoples!

Man we have fancy linked workbooks that do selectable dashboards with graphs and tables and stuff.

Even have one that sends an email on the users behalf ;)

The first one is a tax table but looks like the 12/13FY table as the rates are wrong for this year.

Second is FBT?

Third?

2013/14 individual tax rates mate

Individual Medicare Levy threshold 2008/09

LITO for 2011/12

picked from random spreadsheets

2013/14 individual tax rates mate

Individual Medicare Levy threshold 2008/09

LITO for 2011/12

picked from random spreadsheets

Sure? The lowest bracket is $18k now and you've got it as $6k? every chance that I'm wrong here.... I hate Excel.

Sure? The lowest bracket is $18k now and you've got it as $6k? every chance that I'm wrong here.... I hate Excel.

hmmmm.... its actually $18.2k mate.

and that entry level bracket (6k) should be 18.2K

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
    • Keeping in mind that for most people this is a week to month long job!
    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
×
×
  • Create New...